We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal 1U rackmount switch with eighteen RJ45 ports and front status LEDs

BFKK

BFKK 18-Port Gigabit PoE+ Switch 16 PoE 2 Uplink 250W VLAN Rackmount

SKU CH-F57D-4MR37

An 18-port Gigabit switch with 16 PoE+ ports delivering up to 30 W each and a 250 W total budget, plus two uplink ports and one-key VLAN isolation for IP cameras and access points

  • 16 PoE+ ports deliver up to 30 W each for cameras and access points
  • 250 W total power budget supports multiple high-draw devices simultaneously
  • Two Gigabit uplink ports connect the switch to an NVR or router
  • One-key VLAN isolates ports 1-16 while keeping uplink access
  • Unmanaged plug-and-play design requires no software configuration

18-Port Gigabit PoE+ Switch for Surveillance

This 18-port Gigabit PoE+ switch delivers 16 PoE+ RJ45 ports and two Gigabit uplink ports for connecting to an NVR or internet gateway. Each port supplies up to 30 W with a total PoE budget of 250 W, supporting IEEE 802.3af and 802.3at devices such as IP cameras, wireless access points and VoIP phones. The unmanaged design requires no software configuration.

Check power budget and uplink needs before ordering

Verify that the combined draw of your powered devices stays within the 250 W total budget and that no single device exceeds 30 W per port. Ensure your cabling uses Cat5e or better to reach 1000 Mbps on every link. Confirm you have two free uplink ports on the upstream switch or router for the dedicated Gigabit uplinks. Note that passive PoE equipment is not supported.

Fanless metal chassis runs silent with 250 W budget

The rack-mount metal enclosure operates without fans, so it adds no audible noise to a server cabinet or office rack. Heat dissipates through the case surface while the switch forwards traffic at wire speed across all 18 ports. Power consumption scales with the number of active PoE devices, staying within the 250 W limit during normal surveillance or access-point workloads.

Highlights

  • 16 PoE+ ports deliver up to 30 W each for cameras and access points
  • 250 W total power budget supports multiple high-draw devices simultaneously
  • Two Gigabit uplink ports connect the switch to an NVR or router
  • One-key VLAN isolates ports 1-16 while keeping uplink access
  • Unmanaged plug-and-play design requires no software configuration

Specifications

No published specifications for this item yet.

Questions about this item

Does the 18-port switch ship with rack-mount brackets or must they be bought separately?

The unit is rack-mountable and includes the mounting hardware in the box, so no extra brackets are required.

When should I use the 16 PoE+ ports versus the 2 uplink ports?

Connect cameras, phones or access points to the 16 PoE+ ports for up to 30W each, then link the 2 uplink ports to an NVR or router for network backbone traffic.

What does the 250 W budget mean when every port draws 30 W?

The 250 W total budget powers roughly eight ports at the full 30 W simultaneously; remaining ports share the leftover power or carry data only.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.