We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black nylon-braided 13.3in 12VHPWR 16-pin male to dual 8-pin female GPU extension cable with combs

BFKK

BFKK 12VHPWR 16-Pin Male to 2×8-Pin Female 16AWG Extension Cable 13.3in Black

SKU CH-RCRS-ZTTDF

Extends a 12VHPWR 16-pin GPU connection to two 8-pin PSU cables over 13.3 inches with 16AWG tinned copper rated to 105°C

  • Extends GPU power reach by 13.3 inches for flexible routing
  • 16AWG tinned copper delivers up to 400W with low resistance
  • Nylon braided sleeve withstands 105°C for reliable thermals
  • 12VHPWR 16-pin male to dual 8-pin female fits RTX 4070 Ti
  • Cable combs included for clean, organised cable management

Purpose & Audience

This 12VHPWR extension cable connects a 16-pin male plug to two 8-pin female sockets, letting builders route power to an RTX 4070 Ti, 4070 or 4060 Ti graphics card. The 13.3-inch length and flexible nylon braid suit compact cases where the stock PSU cables fall short.

Upgrade Path

It replaces a short or stiff factory 12VHPWR lead, adding reach and cleaner routing without changing the power delivery chain. The jump is worth it when the original cable cannot reach the GPU cleanly or when a tidier interior matters more than keeping the stock length.

Compatibility Check

Verify your power supply already provides two native 8-pin PCIe outputs; this extender must not plug directly into the PSU. Confirm the graphics card uses a 12+4-pin 12VHPWR connector, because the cable does not support 12-pin RTX 30-series cards. Ensure the PSU can deliver the wattage the GPU requires.

Highlights

  • Extends GPU power reach by 13.3 inches for flexible routing
  • 16AWG tinned copper delivers up to 400W with low resistance
  • Nylon braided sleeve withstands 105°C for reliable thermals
  • 12VHPWR 16-pin male to dual 8-pin female fits RTX 4070 Ti
  • Cable combs included for clean, organised cable management

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the 13.3in 16AWG sleeved cable need inside the case?

The 13.3 inch length and nylon braid add bulk, so allow room for the 16-pin male plug at the GPU and two 8-pin female sockets at the PSU side plus the included cable combs.

How do I install the 12VHPWR 16-pin male to dual 8-pin female extender without damaging the pins?

Use professional crimp or insertion tools, seat the 12+4 pin male fully into the GPU first, then connect two separate PCIe 8-pin cables from the PSU into the female ends for the rated 400W.

When should the 105°C rated 16AWG tinned copper extension be replaced?

Inspect the braid and connectors if the cable sees sustained loads near 400W; replace it if the nylon sleeve frays, pins discolour, or the 105°C temperature limit is ever exceeded.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.