BFKK
BFKK 12 V waterproof LED strip 12 in 12 LED red pack of 6
Six 30 cm waterproof LED strips, each with twelve 5050 SMD LEDs running on 12 V DC and drawing about 2 W
- Ready to stick on with self-adhesive backing
- IP65 waterproof rating withstands splashes and rain
- 120° viewing angle spreads light evenly
- 2 W per strip keeps power draw low
- 20,000-hour rated life reduces replacement frequency
12 V LED strip kit for vehicle accent lighting
This pack contains six 12-inch strips, each fitted with twelve 5050 SMD LEDs in red. The 12 V DC input matches standard automotive electrical systems, so the kit suits cars, trucks or motorcycles that need low-draw underbody or interior glow.
IP65 rating and self-adhesive backing simplify
Each strip is sealed to IP65, resisting water jets and dust for exterior use. The flexible circuit bends around concave or convex panels, while the factory-applied tape holds on metal, plastic or painted surfaces without drilling. Six-inch 18-gauge leads provide reach to a nearby power source.
Six pieces with cut points every three LEDs
The bundle delivers six independent strips, letting you distribute light around a vehicle without splicing. You can shorten any strip at the marked three-LED intervals to fit tight gaps. No switch, controller or power adapter is included, so you wire the leads directly to a fused 12 V circuit.
Highlights
- Ready to stick on with self-adhesive backing
- IP65 waterproof rating withstands splashes and rain
- 120° viewing angle spreads light evenly
- 2 W per strip keeps power draw low
- 20,000-hour rated life reduces replacement frequency
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
What does the DC 12 V interface mean for power draw on this strip?
Each 30 cm strip draws about 2 W at 12 V, so the six-piece pack totals roughly 12 W and can run from a standard vehicle 12 V supply without an extra adapter.
What are the exact dimensions and adhesive backing for mounting these strips?
Each piece measures 30 cm long by 1 cm wide (0.4 in) and has a self-adhesive back with double-sided tape that conforms to concave or convex surfaces.
How do you install the strips and where do people cut them incorrectly?
Peel the tape, press the strip in place, and connect the 18-gauge 6-inch leads to 12 V; cut only at the marked points every three LEDs from the end without wires, otherwise the circuit opens.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
METRA 82-SU1 speaker adapter and wire harness kit 6.5-6.75 in car electronics accessory
- Speaker Spacers
METRA 2013-Up Acadia Enclave Traverse Single DIN HD Radio Kit
- HD Radio Kits for F…
METRA 2013-Up Hyundai Genesis 2-DIN Mounting Kit car hd radio
- HD Radio Kits for F…








