We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal power strip with twelve wide-spaced outlets and a ten-foot cord

BFKK

BFKK 12-Outlet Metal Wall Mount Power Adapter 10ft 15A 125V 1875W Black

SKU CH-18YV-8FT9X

A 12-outlet metal power strip with 1.65-inch spacing for large plugs, 10-foot 14AWG cord, 15A circuit breaker and ETL certification for workshop or garage mounting

  • 12 wide-spaced outlets fit large plugs with 1.65 in spacing
  • 10 ft 14AWG cord reaches distant work areas
  • 15 A circuit breaker protects against overloads and short circuits
  • Aluminium alloy housing resists impact, rust and scratches
  • ETL listed to UL 1363 and CSA C22.2 No. 308 standards

12-Outlet Metal Power Strip for Workshops

This BFKK power adapter delivers 12 widely spaced AC outlets on a durable aluminium alloy housing. The 1.65 inch centre-to-centre spacing accommodates bulky transformers without blocking adjacent sockets. Rated for 15 amps at 125 volts with a 1875 watt maximum load, it suits demanding indoor environments such as workshops, garages and workbenches.

Verify Circuit Capacity and Mounting Surface

Confirm the installation circuit can supply 15 amps at 125 volts and 60 hertz without overload. The unit requires a flat surface for the four included mounting screws and a grounded 125 volt receptacle within 10 feet of the mounting location. Ensure local codes permit permanent mounting of a relocatable power tap in the intended area.

Integrates with High-Draw Equipment Racks

The 14 AWG SJT cord handles sustained current while the built-in 15 amp breaker protects connected gear from over-current and over-temperature events. ETL listing to UL 1363 and CSA C22.2 No. 308 confirms compliance for commercial and industrial use. The illuminated switch provides at-a-glance power status, freeing bench space by consolidating up to twelve devices onto a single mounted strip.

Highlights

  • 12 wide-spaced outlets fit large plugs with 1.65 in spacing
  • 10 ft 14AWG cord reaches distant work areas
  • 15 A circuit breaker protects against overloads and short circuits
  • Aluminium alloy housing resists impact, rust and scratches
  • ETL listed to UL 1363 and CSA C22.2 No. 308 standards

Specifications

No published specifications for this item yet.

Questions about this item

Does the power strip include mounting hardware or must I buy screws separately?

The unit ships with four mounting screws so it can be fixed to a wall or workbench right away.

How do I decide between the 12-outlet model and a smaller version?

Choose this 12-outlet strip when you need to plug in many large adapters at once; the 1.65 inch centre spacing keeps bulky plugs from blocking neighbours.

What does the 1875 W rating mean for everyday use in my workshop?

It is the maximum combined load at 125 V; stay below 15 A total across all 12 outlets and the built-in 15 A breaker will trip if you exceed it.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.