We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 11-piece network tool kit with crimper, tester, punch-down tool, strippers, screwdrivers and connectors in a case

BFKK

BFKK 11-in-1 Network Tool Kit with Crimper Tester Punch Down

SKU CH-23M1-AZBHF

An 11-in-1 kit for crimping, testing and punching down Cat5, Cat5e and Cat6 cables with RJ45, RJ11 and RJ12 connectors

  • Complete kit with 11 tools for cable termination
  • 3-in-1 crimper cuts, strips and crimps RJ45/RJ11/RJ12
  • Cable tester checks 8 wires with LED indicators
  • 110 punch-down tool seats wires in patch panels
  • Includes stripper, screwdrivers and connectors for immediate use

11-in-1 Network Tool Kit

The BFKK 11-in-1 Network Tool Kit bundles a crimping tool, cable tester, punch-down tool, wire strippers, and screwdrivers for Ethernet and telephone wiring jobs. It includes RJ45 and RJ11 connectors suited for Cat5, Cat5e, and Cat6 cables. The kit fits into a portable case for on-site repairs and installations.

Installers needing an all-in-one carry kit

This kit suits technicians and DIY users who terminate, test, and punch down twisted-pair cables in one visit. It is not for installers who require pass-through RJ45 connectors, as the supplied crimper works only with standard connectors. Buyers needing fibre-optic termination tools or certification-grade test reports should look at specialist equipment.

Crimper limited to standard RJ45 connectors

The included 3-in-1 crimping tool cuts, strips, and crimps RJ45, RJ11, and RJ12 plugs for 8P8C, 6P6C, and 4P4C configurations. It cannot terminate pass-through connector types. This single constraint decides whether the kit matches the connector stock you already use.

Highlights

  • Complete kit with 11 tools for cable termination
  • 3-in-1 crimper cuts, strips and crimps RJ45/RJ11/RJ12
  • Cable tester checks 8 wires with LED indicators
  • 110 punch-down tool seats wires in patch panels
  • Includes stripper, screwdrivers and connectors for immediate use

Specifications

No published specifications for this item yet.

Questions about this item

Will the 110 punch-down tool seat wires on the patch panel I already have?

The kit includes an 110 punch-down impact tool designed for standard 110-type blocks, so it will seat wires on any compatible patch panel you are keeping.

How do I verify the cable tester is working correctly after I install the battery?

Insert a 9 V battery, connect a known-good cable to both the main and remote units, and confirm that all eight LEDs light in sequence for each wire pair.

Does the box contain the 9 V battery the tester needs, or must I buy it separately?

The 9 V battery is not included; you will need to purchase one separately, while the kit supplies the crimper, tester, stripper, screwdriver, punch-down tool and a selection of RJ45 and RJ11 connectors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.