We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Spool of 1.75 mm silk PLA filament in orange-red multicolor gradient, 1 kg net weight

BFKK

BFKK 1.75mm 1Kg Silk PLA Orange Red Multicolor Fast Change Filament 3d printers accessory

SKU CH-V1TK-PCM3Y

Silk PLA filament shifts colour every 5-10 metres across four shiny hues, prints smoothly at 1.75 mm diameter on most FDM printers, and comes vacuum-sealed with a reusable zip bag

  • Fast colour shifts every 5‑10 metres for vibrant prints
  • 75 mm diameter feeds smoothly on most FDM printers
  • Silk‑like shiny finish adds pearly lustre to models
  • 1 kg spool vacuum‑sealed with desiccant stays dry
  • Includes reusable zip‑bag and 0.4 mm+ nozzle tip

Silk PLA filament for FDM printers

This 1.75 mm silk PLA spool weighs 1 kg and shifts colour every 5 to 10 metres across orange, red, purple and peacock blue tones. The rapid gradient suits makers who want vibrant, multi-colour prints from a single spool without pausing to swap filament. It feeds smoothly on most common FDM printers and 3D pens.

Check nozzle and temperature before use

The supplier advises a fresh 0.4 mm or larger nozzle and recommends printing at a higher temperature with lower speed than standard PLA. Verify that your hot-end can reach the required range and that your slicer profile can be adjusted accordingly. Ensure the printer’s extruder path is clear to avoid any feeding issues.

Vacuum-sealed spool with resealable bag

Each spool ships vacuum-packed with desiccant and includes a reusable zipper bag for storage between prints. The tangle-free winding means the filament end should be secured in the spool holes after every session. The silk finish leaves a smooth, pearly surface on finished models.

Highlights

  • Fast colour shifts every 5‑10 metres for vibrant prints
  • 75 mm diameter feeds smoothly on most FDM printers
  • Silk‑like shiny finish adds pearly lustre to models
  • 1 kg spool vacuum‑sealed with desiccant stays dry
  • Includes reusable zip‑bag and 0.4 mm+ nozzle tip

Specifications

No published specifications for this item yet.

Questions about this item

Does the 1.75 mm spool come with any tools or must I buy a nozzle separately?

The package includes one printer tool and the filament spool; a new 0.4 mm or larger nozzle is recommended for best results.

How quickly does the colour shift on this 1 kg silk PLA?

The filament changes colour randomly every 5 to 10 metres, cycling through silk orange, red, purple and peacock blue.

What print settings work well for this fast-change silk PLA on a typical FDM printer?

Use a higher nozzle temperature and slower speed than standard PLA; keep the spool dry in its vacuum bag with desiccant between prints.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.