We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small 1.5 inch LED pool light with 100ft cord

BFKK

BFKK 1.5 Inch LED Color Pool Light AC12V IP68 100ft Cord

SKU CH-E770-TDTMJ

A direct Pentair GloBrite replacement with a 100ft IP68 cord, 12W LED output matching 500W incandescent brightness and 90% energy savings

  • Direct Pentair GloBrite replacement fits 1.5-inch niches
  • 12 VAC operation with IntelliTouch and EasyTouch systems
  • 12 W LED equals 500 W incandescent brightness
  • 100 ft IP68 cord removes underwater splices
  • 90 % less energy used and 10× longer life

Direct Pentair GloBrite Replacement

This 1.5-inch LED fixture is engineered as a high-performance replacement for Pentair GloBrite pool lights. It fits standard niches and works with Pentair IntelliTouch and EasyTouch automation systems for a seamless upgrade. The unit operates safely on 12VAC power and requires a suitable transformer if not connected to a Pentair control system.

Thermals Noise and Power Draw

The 12W LED consumes a fraction of the energy used by traditional incandescent bulbs, cutting energy use by up to 90 percent. It delivers illumination equivalent to a 500W incandescent while running significantly cooler. The IP68-rated sealed casing prevents leaks and corrosion for reliable long-term operation underwater.

AC12V Voltage Requirement

This light must be powered by 12VAC; do not connect it directly to 120V and do not use a 12VDC adapter. A compatible 120VAC to 12VAC transformer is required when not using Pentair automation. The included 100-foot heavy-duty cord allows a direct connection to the junction box without underwater splicing.

Highlights

  • Direct Pentair GloBrite replacement fits 1.5-inch niches
  • 12 VAC operation with IntelliTouch and EasyTouch systems
  • 12 W LED equals 500 W incandescent brightness
  • 100 ft IP68 cord removes underwater splices
  • 90 % less energy used and 10× longer life

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 1.5 inch LED light into my existing Pentair GloBrite niche?

Fit the fixture into the standard niche and connect the 100ft cord to a 12VAC transformer or Pentair IntelliTouch and EasyTouch automation; never apply 120V directly or use a 12VDC adapter.

What part will need replacement after extended use?

The sealed LED module is rated to last 10 times longer than a 500W incandescent; if output fades the whole fixture is replaced as a unit.

What limits continuous operation first?

The IP68 waterproof seal and UV resistant housing are built for constant submersion; the 12W LED runs cool so thermal limits are not reached under normal use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.