We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminium wall mount arm with laptop tray and VESA monitor bracket

BESIGN

BESIGN XSJ8013WT Wall Mount 2 in 1 Accessory (Black)

SKU CH-XCA1-6FQ58

A wall-mounted arm with a 230 mm laptop tray and VESA 75x75 or 100x100 monitor bracket supports up to 8 kg and offers full-motion articulation

  • Fits laptops up to 17 inches and monitors 17 to 27 inches
  • VESA 75x75mm and 100x100mm support holds screens up to 8kg
  • 230mm tray tilts -15 to 75 degrees and rotates 360 degrees
  • Head swivels -90 to 90 degrees with 180-degree arm swivel for full motion
  • Three-section aluminium arm mounts securely to the wall for space-saving setup

Wall-Mount Arm for Laptop and Monitor

The BESIGN XSJ8013WT is a two-in-one wall mount designed for users who need both a laptop tray and a VESA monitor bracket on a single articulated arm. It suits home offices or shared workspaces where desk space is limited and a fixed installation is preferred. The arm supports laptops up to 17 inches and monitors from 17 to 27 inches. Buyers who need a freestanding clamp or grommet mount cannot use this product.

Thermal Noise and Power Draw in Normal Use

This accessory has no electronic components, so it produces no heat, consumes no power and generates no fan noise during operation. The mechanical spring arm moves silently when adjusted and holds position without motors or pumps. Because it draws zero watts, it adds nothing to the room's thermal load or electricity bill.

Bundled Accessories and Software Changes

The package includes a three-section aluminium arm, a 230 by 230 millimetre laptop tray and a wall-mount bracket with VESA 75 by 75 and 100 by 100 millimetre patterns. No software, drivers or cables are supplied, so the mount works immediately with any compatible device. There is no firmware to update or utility to configure.

Highlights

  • Fits laptops up to 17 inches and monitors 17 to 27 inches
  • VESA 75x75mm and 100x100mm support holds screens up to 8kg
  • 230mm tray tilts -15 to 75 degrees and rotates 360 degrees
  • Head swivels -90 to 90 degrees with 180-degree arm swivel for full motion
  • Three-section aluminium arm mounts securely to the wall for space-saving setup

Specifications

No published specifications for this item yet.

Questions about this item

How do I wall-mount the three-section arm and which step is most often missed?

Fix the supplied wall bracket to studs or solid masonry, then attach the three-section arm; the step most often missed is verifying the bracket is level before tightening the arm bolts.

What parts will need checking or replacement after extended use?

The mechanical spring inside the arm and the pivot joints at the head tilt, head swivel and arm swivel points should be inspected periodically for wear or loosening.

At what point does the mount reach its limit during sustained use?

The 8 kg maximum loading is the first limit reached; exceeding it with a heavier laptop or monitor will cause the spring arm to sag or fail to hold position.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.