We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board PCIe card with two detachable antennas and adapter cable

BESIGN

BESIGN XB530NF MT7922 RZ616 2 in 1 accessory

SKU CH-ET0Y-VF1CD

A PCIe 6E card adding 2.4G, 5G and 6Ghz triple-band wireless plus 5.2 connectivity, compatible with PCIe x1/x4/x8/x16 slots on Windows 10, 11 and Linux

  • 6E protocol delivers higher bandwidth and lower latency
  • BT5.2 support provides faster, stable connections with low delay and wide coverage
  • Triple-band 2.4G 5G 6GHz operation gives more wireless channels for a complete network
  • MU-MIMO with 574Mbps on 2.4G and 2400Mbps on 5G and 6G enables high-speed data transfer
  • PCIe x1 x4 x8 x16 compatibility works with Windows 10 11 and Linux for broad system support

PCIe 6E card for desktop upgrades

This PCIe 6E card adds triple-band Cordless and BT5.2 to a desktop through any PCIEx1, x4, x8 or x16 slot. It targets builders who need 2.4G, 5G and 6Ghz channels on Windows 10, 11 or Linux without replacing the motherboard. The adapter uses an MT7922 RZ616 controller and supports MU MIMO for multi-device traffic.

Thermals noise and power in normal use

The printed circuit board draws power only from the PCIe slot and runs without a fan, so it adds no audible noise to the system. Typical operation stays within the slot’s standard power envelope, leaving case airflow and CPU temperatures unchanged. No external power connector is required.

Antennas cable and driver impact

Two external antennas screw onto the bracket to extend Cordless coverage across all three bands. A short adapter cable links the card to the motherboard header for BT5.2 functionality. Plug-and-play on Windows 10, 11 and Linux means the hardware is recognised immediately, letting the OS handle connection management without extra software.

Highlights

  • 6E protocol delivers higher bandwidth and lower latency
  • BT5.2 support provides faster, stable connections with low delay and wide coverage
  • Triple-band 2.4G 5G 6GHz operation gives more wireless channels for a complete network
  • MU-MIMO with 574Mbps on 2.4G and 2400Mbps on 5G and 6G enables high-speed data transfer
  • PCIe x1 x4 x8 x16 compatibility works with Windows 10 11 and Linux for broad system support

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the PCIe 6E card and antennas in a desktop PC?

Insert the card into any PCIe x1, x4, x8 or x16 slot, secure it with the supplied screw, attach the adapter cable to the card, then screw both external antennas onto the cable connectors. Windows 10/11 and Linux detect it without extra drivers.

What parts of the BESIGN XB530NF MT7922 RZ616 may need replacement over time?

The two detachable antennas and the adapter cable are the only external parts; they can be swapped if the connectors wear or the cables fray. The PCIe card itself has no user-serviceable components.

What speed ceiling appears first when the 6 GHz band is under sustained load?

The 6 GHz radio tops out at 2400 Mbps, so that link-rate limit is reached before the PCIe x1 bus or the MU-MIMO streams become the bottleneck.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.