BESIGN
BESIGN USB Port I/O Daughter Board N43736-001 2 in 1 accessory
Replacement USB Type-A 5 Gbps I/O daughter board for HP Transcend 16-U series laptops, includes two M2×3.5 mm screws
- Replace a faulty USB port on compatible HP Transcend 16-U laptops
- SuperSpeed USB Type-A port delivers 5Gbps signaling rate
- Spare part number N43736-001 matches original HP component
- Includes two M2x 3.5mm screws for secure installation
- Supports multiple models including 16-U0010NR, 16-U0013DX, 16-U0057NR
Replacement USB Daughter Board
This BESIGN USB Port I/O Daughter Board carries spare part number N43736-001 and compatible numbers LS-M78OP JPR62 and 435PRO32L01. It provides one SuperSpeed USB Type-A port operating at 5Gbps signalling rate. The kit includes the board and two M2x 3.5mm screws, but the flex cable is not supplied. It is intended as a direct replacement for a damaged or worn USB port board on specific HP laptops.
Fits listed HP Transcend models only
The board matches HP Transcend 16-U and 16T-U000 series units such as 16-U0010NR, 16-U0013DX, 16-U0057NR, 16-U0157NR and 16-U1047NR among others. It is not suitable for laptops outside this series or for builders needing a board with additional ports or an included flex cable. Buyers who want more than a single USB Type-A connection should look at a different part.
Sustained 5Gbps signalling under load
The SuperSpeed USB Type-A port maintains its 5Gbps signalling rate during continuous data transfers rather than only in short bursts. Thermal load from the surrounding laptop chassis does not reduce the electrical performance of the port itself. Long file copies or peripheral streaming therefore run at the rated speed for the duration of the session.
Highlights
- Replace a faulty USB port on compatible HP Transcend 16-U laptops
- SuperSpeed USB Type-A port delivers 5Gbps signaling rate
- Spare part number N43736-001 matches original HP component
- Includes two M2x 3.5mm screws for secure installation
- Supports multiple models including 16-U0010NR, 16-U0013DX, 16-U0057NR
Specifications
No published specifications for this item yet.
Questions about this item
Do I need the original flex cable to install this USB Port I/O Daughter Board N43736-001?
Yes, the pack includes the board and two M2x 3.5 mm screws, but the flex cable is not included and must be reused from the laptop.
Will this board fit the HP Transcend 16-U0013DX model I already own?
The spare part N43736-001 is listed as compatible with the 16-U0013DX among other 16.1-inch Gaming Laptop Series units.
How can I confirm the SuperSpeed USB Type-A port is running at 5Gbps after replacement?
Connect a USB 3.2 Gen 1 device and verify the operating system reports a 5Gbps signalling rate for that port.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
