BESIGN
BESIGN Proxmark3 RDV2 2 in 1 accessory
Open-source RFID research tool with LF and HF antennas, MMCX cables, Micro-USB link and a blank PVC card for cloning and analysis
- Open-source hardware and firmware for full inspection
- Improved LF antenna in firmware V2 for better low-frequency reads
- Includes HF antenna and MMCX cables for high-frequency tasks
- Micro-USB cable connects directly to PC for data transfer
- White PVC card supplied for immediate cloning tests
Proxmark3 RDV2 Accessory Kit
The BESIGN Proxmark3 RDV2 bundle equips security researchers and RFID enthusiasts with a complete open-source platform for analysing low-frequency and high-frequency credentials. Everything needed to start reading, writing and cloning cards arrives in one package.
Dual LF and HF Antenna Set
The kit includes both a low-frequency and a high-frequency antenna with MMCX cables, letting the Proxmark3 RDV2 communicate with the widest range of contactless tags without extra hardware.
Micro-USB Cable and Blank PVC Card
A Micro-USB link connects the board directly to a PC for firmware updates and live captures, while the supplied white PVC card provides an immediate target for cloning or emulation tests.
Highlights
- Open-source hardware and firmware for full inspection
- Improved LF antenna in firmware V2 for better low-frequency reads
- Includes HF antenna and MMCX cables for high-frequency tasks
- Micro-USB cable connects directly to PC for data transfer
- White PVC card supplied for immediate cloning tests
Specifications
No published specifications for this item yet.
Questions about this item
How does the improved LF antenna in firmware V2 change real-world reading distance?
The V2 firmware ships with an upgraded LF antenna that extends low-frequency read range compared with earlier revisions, so tags are detected more reliably at typical working distances.
What practical limit does the Micro-USB connection place on data transfer speed?
The Micro-USB link caps communication at USB 2.0 full-speed rates, which is sufficient for the Proxmark3’s command stream but slower than modern high-speed interfaces.
What physical space is needed to mount the main board and both antennas?
The package includes a main board, separate LF and HF antennas, and MMCX cables, so you need a flat area large enough for the board plus clearance to route the two antenna cables without sharp bends.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
