BESIGN
BESIGN HDMI to DisplayPort 4K@60Hz 1.5m Cable 2 in 1 accessory
Connects an HDMI source to a DisplayPort monitor at up to 4K 60 Hz without external power
- Plug-and-play setup with no external power required
- 4K@60Hz output backed by HDMI 2.0/2.1 and DP 1.2 support
- Works with Xbox Series X, PS5, PS4 Pro and HDMI-output PCs
- Unidirectional HDMI-to-DisplayPort signal path prevents wrong-way connections
- 5 m length suits tidy desk and gaming layouts
What this cable does
This unidirectional adapter connects an HDMI source to a DisplayPort monitor without external power or drivers. It supports consoles such as PS5, PS4 Pro and Xbox Series X plus PCs and laptops with HDMI output. The signal travels one way only, from HDMI to DisplayPort. It is built for clean desk and gaming setups.
Resolution headroom and limits
The cable delivers up to 4K at 60 Hz and falls back to 1440p or 1080p when either end cannot drive 4K. Both the HDMI source and the DisplayPort monitor must support 4K at 60 Hz for the top mode to appear. It will not work through adapters, hubs, docks, KVM switches or signal extenders, and chaining or secondary conversion is not supported.
Deciding specification
The HDMI source must provide HDMI 2.0 or 2.1 and the DisplayPort monitor must accept DP 1.2 or higher with HDCP 1.4 or 2.2. If either requirement is missing the link will not reach 4K at 60 Hz. Buyers who need DisplayPort-to-HDMI direction or bidirectional use must choose a different product.
Highlights
- Plug-and-play setup with no external power required
- 4K@60Hz output backed by HDMI 2.0/2.1 and DP 1.2 support
- Works with Xbox Series X, PS5, PS4 Pro and HDMI-output PCs
- Unidirectional HDMI-to-DisplayPort signal path prevents wrong-way connections
- 5 m length suits tidy desk and gaming layouts
Specifications
No published specifications for this item yet.
Questions about this item
Will this 1.5 m cable work with my older graphics card that only has HDMI 1.4?
The cable requires an HDMI 2.0 or 2.1 source; an HDMI 1.4 output will not provide the bandwidth needed for 4K@60 Hz and may fall back to 1080p or 1440p.
How can I confirm the link is running at 4K@60 Hz after I plug it in?
Open the monitor's on-screen information menu or the source device's display settings; both should show 4K at 60 Hz with HDCP 1.4 or 2.2 active.
Does the package include any USB power adapter or driver disc?
No external power, adapters or drivers are supplied or required; the cable draws all power from the HDMI source and works plug-and-play.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
