BESIGN
BESIGN HDBaseT HDMI Extender 4K 60Hz USB 2.0 KVM RS-232 2 in 1 accessory
Extends 4K 60Hz HDMI, USB 2.0 and RS-232 up to 230 feet over Cat5e/6/7 with HDR and 18Gbps bandwidth
- Extend 4K 60 Hz video up to 230 ft over Cat5e/6/7
- Transmit 1080p signals up to 328 ft with lossless HDBaseT
- Control a remote PC via USB 2.0 keyboard and mouse up to 328 ft
- Support HDR, 3D and 7.1 ch audio including DTS-HD and Dolby TrueHD
- Power the receiver through the cable with PoC for simpler installation
4K 60Hz HDBaseT Extender with USB 2.0 KVM
This extender transmits HDMI 2.0a signals up to 230 feet at 4K 60Hz 4:4:4 or 328 feet at 1080p over Cat5e, Cat6 or Cat7 cable. It supports HDR, 3D, CEC and HDCP 2.2 copy protection. USB 2.0 extension allows remote keyboard, mouse or touch-panel control up to 328 feet with 480 Mbps data rates. It is built for installers and AV integrators who need lossless video and peripheral control over long runs.
Passive operation with PoC power
The unit draws power over the HDBaseT link via PoC, so only one end requires a local supply. No active cooling is used, resulting in silent operation and minimal power draw during normal use. The transmitter and receiver pair run cool in typical rack or behind-display mounting. This simplifies wiring and reduces the number of outlets needed in the installation.
Single-cable Cat5e/6/7 infrastructure
A single solid-copper Cat5e, Cat6 or Cat7 cable carries video, audio, USB, IR, RS-232 and power between the two units. The extender frees the source device from the display location, enabling centralised equipment rooms or hidden PC mounts. It does not support HDMI 1.2 sources, so legacy 720p-only players will not work. Buyers needing fibre transport or runs beyond 328 feet must choose a different solution.
Highlights
- Extend 4K 60 Hz video up to 230 ft over Cat5e/6/7
- Transmit 1080p signals up to 328 ft with lossless HDBaseT
- Control a remote PC via USB 2.0 keyboard and mouse up to 328 ft
- Support HDR, 3D and 7.1 ch audio including DTS-HD and Dolby TrueHD
- Power the receiver through the cable with PoC for simpler installation
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the HDBaseT extender and what cable mistake causes dropouts?
Connect the transmitter to the source and the receiver to the display using a single Cat5e/6/7 cable. The step people get wrong is using copper-clad aluminium cable; the supplier specifies pure copper Cat6 for reliable 18 Gbps transmission.
What maintenance or replacement will the extender need over time?
No user-serviceable parts or scheduled maintenance are described. If the Cat5e/6/7 cable is damaged, replace it with an equivalent pure copper run. The PoC design means no separate power supply exists to fail at either end.
What is the first limit I will hit when running 4K 60 Hz 4:4:4 continuously?
The 230 ft (70 m) distance ceiling for 4K 60 Hz 4:4:4 is the hard limit; beyond that the signal drops to 1080p at 328 ft. Bandwidth is fixed at 18 Gbps and USB 2.0 at 480 Mbps, so neither scales higher.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
