BESIGN
BESIGN 2Pack 140mm USB Fan 2 in 1 accessory
Two 140 mm USB fans with a 1-to-2 splitter run from one port, dual ball bearings rated for 60 000 hours and 19 dBA noise
- Cools routers, consoles and laptops with 140 mm airflow
- One USB port powers both fans via included splitter cable
- Dual ball bearings rated for 60000 hours of continuous use
- Whisper-quiet operation at only 19 DBA noise level
- Plug-and-play USB power works wherever a port is available
Compact cooling for small devices
This twin-pack of 140 mm USB fans targets owners of routers, game consoles, TV boxes, DVRs, modems and AV cabinets who need extra airflow. Each unit draws power from any standard USB port, so no separate adapter is required. The 2-in-1 splitter cable lets both fans run from a single socket while still allowing independent use.
Replaces passive vents or single-fan kits
The pair upgrades enclosures that rely on convection alone or that ship with only one small blower. The jump is worthwhile when components throttle or shut down during extended loads, especially in stacked AV racks. Dual ball bearings rated for 60000 hours give a longer service interval than sleeve-bearing alternatives.
Plug-in install with one common snag
Installation is a matter of plugging the splitter into a USB port and positioning the fans where airflow is needed; they can sit flat or stand upright. The main issue arises when a device’s USB port cannot supply enough current for both fans simultaneously, causing one or both to stall.
Highlights
- Cools routers, consoles and laptops with 140 mm airflow
- One USB port powers both fans via included splitter cable
- Dual ball bearings rated for 60000 hours of continuous use
- Whisper-quiet operation at only 19 DBA noise level
- Plug-and-play USB power works wherever a port is available
Specifications
No published specifications for this item yet.
Questions about this item
Will the 140 mm frame fit the vents on my AV cabinet?
Each fan is 140 mm square; measure your vent opening to confirm clearance before mounting.
Do I need any tools to connect the 1-to-2 USB splitter cable?
No tools required — plug the single male USB into a port, then attach both fan cables to the two female sockets; fans also run separately if preferred.
When should I replace the fans given the 60000-hour bearing rating?
The dual ball bearings are rated for 60000 hours; replace a fan if airflow drops or noise rises above the stated 19 DBA level.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



