We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact network injector with two Ethernet ports and power input

BESIGN

BESIGN 2.5Gb PoE+ Injector 30W 15.4W 2 in 1 accessory

SKU CH-HX8G-JQZF7

Delivers 2.5 Gbps data and up to 30 W PoE+ power over a single cable to 100 m for IP cameras, WiFi 6 APs and VoIP phones

  • 5× faster data transfer at 2.5 Gbps for high-bandwidth applications
  • Up to 30 W PoE+ power with 15.4 W backward compatibility
  • Single cable carries power and data up to 100 m
  • Automatic power detection protects devices from overload and short circuits
  • Reduces installation cost by 50 % with one-cable deployment

2.5Gb PoE+ Injector 30W

The BESIGN 2.5Gb PoE+ Injector delivers 2.5Gbps data transfer and up to 30W of power over a single Ethernet cable. It complies with IEEE 802.3at and 802.3af standards, automatically adjusting output for 30W or 15.4W devices. The unit supports transmission distances up to 100m using Cat5e or Cat6 cabling.

Suits IP cameras, WiFi 6 APs, VoIP phones

This injector is built for devices that require both high-speed data and PoE+ power up to 30W. It will not meet the needs of installations requiring more than 30W per port or multi-port power distribution. Buyers needing managed switching features or fibre uplink connectivity should look at other equipment.

Plug-and-play installation

The device operates without configuration; connect the network source to the data input and the powered device to the PoE output. The intelligent chip handles device detection and power negotiation automatically. Common issues arise when cable runs exceed 100m or when non-standard cabling prevents the injector from establishing a stable link.

Highlights

  • 5× faster data transfer at 2.5 Gbps for high-bandwidth applications
  • Up to 30 W PoE+ power with 15.4 W backward compatibility
  • Single cable carries power and data up to 100 m
  • Automatic power detection protects devices from overload and short circuits
  • Reduces installation cost by 50 % with one-cable deployment

Specifications

No published specifications for this item yet.

Questions about this item

Does my IP camera need to support IEEE 802.3at or 802.3af for the injector to power it?

Yes, the injector automatically detects and adjusts output for any 15.4 W (af) or 30 W (at) PoE device, so the camera must comply with one of those standards.

Will my existing Cat5e cable handle the 2.5 Gbps link over 100 m?

Cat5e or Cat6 cable supports the full 100 m (328 ft) distance at 2.5 Gbps, so older cabling you already have will work without replacement.

How do I confirm the injector is delivering 30 W and 2.5 Gbps after I connect it?

The built-in intelligent chip manages power negotiation and data rate; verify the link lights on your switch and check the powered device’s status page for 2.5 Gbps and 30 W operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.