We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SPDT rocker switch with three blade terminals, snap-in mount

BEP MARINE

BEP MARINE Rocker Switch 25A SPDT (ON)/OFF/(ON) 12V/24V video accessory

SKU CH-EV2P-E3P68

Single-pole double-throw rocker switch rated 25 A at 12 V or 24 V DC with three 1/4" blade terminals and snap-in mounting for 1.45 × 0.83" panel cut-out

  • TypeOthers
  • Rated 25 A at 12 V DC for high-current loads
  • SPDT (ON)/OFF/(ON) action controls two separate circuits
  • Snap-in mount fits 1.45 × 0.83 in panel cut-out
  • Three 1/4 in blade terminals enable quick wiring
  • Compatible with 12 V and 24 V DC systems

25A SPDT Rocker Switch for Marine Video Accessories

This BEP Marine rocker switch controls one of two circuits from a single panel location. Rated at 25A on 12V or 24V DC systems, it suits video accessory wiring in boats or vehicles. Three 1/4-inch blade terminals accept standard push-on connectors. Snap-in mounting fits a 1.45 by 0.83 panel cut-out in material 0.093 to 0.187 thick.

Who Should Use This Momentary Switch

Installers needing momentary (ON)/OFF/(ON) action for dual-circuit control will find this switch appropriate. It is not suited for applications that require a maintained ON position in either direction. Buyers who need a simple ON/OFF function or a different pole configuration should look at other switch types.

Snap-In Mounting Fits 1.45 by 0.83 Panel Cut-Out

The switch snaps into a rectangular panel hole measuring 1.45 by 0.83 inches and accepts panel thicknesses from 0.093 to 0.187 inches. Verify your panel dimensions before purchase because no adapter or bezel is included. This single mechanical specification determines whether the switch fits your installation.

Highlights

  • Rated 25 A at 12 V DC for high-current loads
  • SPDT (ON)/OFF/(ON) action controls two separate circuits
  • Snap-in mount fits 1.45 × 0.83 in panel cut-out
  • Three 1/4 in blade terminals enable quick wiring
  • Compatible with 12 V and 24 V DC systems

Specifications

BrandBEP MARINE
TypeOthers

Questions about this item

What panel-hole size does the 1.45 x .83 switch require?

Cut a 1.45 by 0.83 opening in material 0.093 to 0.187 thick and snap the switch in.

How do I wire the three 1/4 blade terminals for (ON)/OFF/(ON) action?

Connect the centre terminal to power, the two outer terminals to the separate loads; centre-up powers one load, centre-down powers the other, centre-off kills both.

When should I replace the switch if it carries 25 A at 12 V DC?

Replace it when the toggle feels loose, the blades show discolouration or the switch fails to latch in either ON position.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.