Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00996367BTC
In stock
Benro
Benro BV8 Twin Leg Video Tripod Kit 17.6 lb 63 in
Twin-leg aluminum video tripod kit with fluid head and mid-level spreader supports 17.6 lb payload and reaches 63 inches height
- Supports heavy rigs up to 17.6 lb payload capacity
- Silky pans and tilts via stepped fluid cartridge drag 0-4
- Twin-leg aluminum build with mid-level spreader for rock-steady shots
- Extends to 63 in max height with three-section twist locks
- Wide tilt range +90° to -70° for creative low and high angles
Benro BV8 Twin Leg Video Tripod Kit
The Benro BV8 is a 3-section aluminum alloy tripod kit with a video head and ML08 mid-level spreader, built for videographers who need stable support on varied terrain. It handles professional cameras and accessories up to 17.6 lb with a 5-step counterbalance system. Maximum height reaches 63 in when fully extended. Twist lever locks secure each leg section quickly.
ML08 Mid-Level Spreader and Fluid Cartridge
The included ML08 mid-level spreader adds rigidity on uneven ground, reducing flex during pans and tilts. A stepped fluid cartridge provides drag control from 0 to 4 for smooth, repeatable movements. Independent pan and tilt locks sit on the operator side for fast adjustments. A floor spreader is also supplied for additional stability options.
17.6 lb Payload with 63 in Height
The system supports rigs up to 17.6 lb (7.98 kg) with counterbalance steps 0 through 4, keeping the camera steady at any tilt angle. Tilt range spans +90° to -70° for high and low angles. At 63 in (160.02 cm) fully extended, it suits standing operation; the 3-section legs limit how low the kit can go. Builders needing higher payload or taller maximum height should look elsewhere.
Highlights
- Supports heavy rigs up to 17.6 lb payload capacity
- Silky pans and tilts via stepped fluid cartridge drag 0-4
- Twin-leg aluminum build with mid-level spreader for rock-steady shots
- Extends to 63 in max height with three-section twist locks
- Wide tilt range +90° to -70° for creative low and high angles
Specifications
| Brand | Benro |
|---|
Questions about this item
Will the fluid cartridge or counterbalance springs need servicing after heavy use?
The stepped fluid cartridge system and 5-step counterbalance (0-4) are sealed units; no user-serviceable parts are specified, so plan on professional service if drag feels uneven.
What stops me from raising the legs higher than 63 inches?
The 3-section aluminum legs with twist lever locks reach a hard stop at 63 in (160.02 cm); the mid-level spreader ML08 then locks the stance width.
How hot or loud does the head get during an all-day shoot?
The fluid head has no motor or fan, so it runs silent and stays at ambient temperature; only the aluminum legs may feel warm after prolonged sun exposure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
