BenQ
BenQ W6000 Projector Lamp 280W 5J.J2605.001
A 280 W replacement lamp module with a new Philips UHP bulb and housing delivers 2,000 hours in normal mode or 3,000 hours in economy mode for the BenQ W6000 projector
- TypeProjector Lamp
- Wattage280W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with Philips UHP 280W bulb
- Up to 3000 hours lamp life in Economy mode
- OEM quality built to ISO 9001 standards
- Compatible with BenQ W6000 projector model 5J.J2605.001
- Genuine OEM lamp from Philips Osram Ushio Phoenix Iwasaki Matsushita
BenQ W6000 280W Projector Lamp
This is a new 280W replacement lamp module for the BenQ W6000 projector. It arrives as a fully assembled bulb and housing unit ready for immediate installation. The lamp uses a Philips UHP bulb rated for 2000 hours in normal mode or 3000 hours in economy mode. It suits owners needing a direct OEM-standard replacement.
Replacing a dim or expired original lamp
The module replaces the factory-fitted lamp when brightness drops or the projector signals end of life. Swapping restores original luminance and colour performance without requiring a new projector. The upgrade is worth it when the existing lamp reaches its rated 2000 to 3000 hour limit or shows visible degradation.
Tool-free housing swap in minutes
Installation involves opening the projector lamp door, removing the old module, and sliding the new assembly into place until it seats firmly. No specialised tools are required. The most common issue is forgetting to reset the lamp timer in the projector menu after fitting, which keeps the replacement warning active.
Highlights
- Ready-to-install module with Philips UHP 280W bulb
- Up to 3000 hours lamp life in Economy mode
- OEM quality built to ISO 9001 standards
- Compatible with BenQ W6000 projector model 5J.J2605.001
- Genuine OEM lamp from Philips Osram Ushio Phoenix Iwasaki Matsushita
Specifications
| Brand | BenQ |
|---|---|
| Type | Projector Lamp |
| Wattage | 280W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
What is the model number of the BenQ W6000 projector lamp?
The BenQ model number for this projector lamp is 5J.J2605.001.
How is the BenQ W6000 lamp module installed?
The lamp arrives as a fully assembled bulb and housing, so you simply remove the old module and insert the new one.
When should the 280W lamp be replaced?
The lamp is rated for 2,000 hours in Normal mode or 3,000 hours in Economy mode before replacement is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



