BenQ
BenQ W2000 OEM Replacement Projector Lamp 200W
A 200 W replacement lamp module with 2,000-hour normal life and 3,000-hour economy life
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- Bright, reliable output from genuine Osram P-VIP 240W bulb
- Up to 3,000 hours lamp life in Economy mode
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time
Ready-to-install lamp module
The BenQ W2000 replacement lamp ships as a complete 200 W module with bulb and housing pre-assembled, so it fits straight into compatible BenQ projectors without extra assembly. It uses a P-VIP light source rated at 240 W and carries an ISO 9001 manufacturing baseline.
For owners needing a direct swap
This unit suits anyone whose BenQ projector calls for the 5J.05Q01.001 lamp and who wants a new OEM-grade replacement that is ready to fit. It is not for users whose projector requires a different lamp code, a different wattage or a bare bulb without housing.
Rated hours and practical headroom
In normal mode the lamp is rated for 2 000 hours and in economy mode for 3 000 hours, with a design target of 3 500 hours under test conditions. Light output will gradually decline as those limits approach, and the module must be replaced once brightness or stability falls below usable levels.
Highlights
- Ready to install with pre-assembled bulb and housing
- Bright, reliable output from genuine Osram P-VIP 240W bulb
- Up to 3,000 hours lamp life in Economy mode
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time
Specifications
| Brand | BenQ |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Which BenQ projector models accept the 5J.05Q01.001 lamp module?
The lamp module is built for the BenQ W2000 projector and matches the manufacturer part number 5J.05Q01.001.
Can I reuse the old lamp housing when installing this 200W replacement?
No, the unit ships as a complete bulb-and-housing assembly so no separate housing is needed.
How do I confirm the new lamp is operating correctly after installation?
Reset the projector's lamp timer, then verify brightness and that the hour counter starts from zero.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible



