BenQ
BenQ PE8250 250W Projector Lamp 2000 Hrs
OEM replacement lamp module with a Philips UHP 250 W bulb and housing, rated for 2,000 hours
- TypeProjector Lamp
- Wattage250W
- Lamp Life2,000 Hrs.
- Ready-to-install module with housing included
- 250 W UHP bulb delivers 2,000 hours rated life
- OEM-sourced from Philips Osram Ushio Phoenix Iwasaki Matsushita
- Each unit tested for beam ignition voltage and run-time
- Manufactured to ISO 9001 quality standards
Ready-to-fit replacement lamp
The BenQ PE8250 module ships as a complete 250 W bulb and housing assembly matched to BenQ part number 60.J5016.CB1. It is intended for owners of compatible BenQ projectors who need a direct replacement without separate bulb handling.
OEM-grade build with multiple sourcing options
Each unit is assembled to ISO 9001 standards using genuine Philips UHP bulbs or equivalent OEM-compatible sources. The pre-installed housing ensures correct alignment and secure connector seating during a straightforward projector lamp-door swap.
2 000-hour rated life at 250 W
The lamp is specified for 2 000 hours of typical operation at its rated 250 W power draw. In normal use this translates to consistent brightness and stable ignition over the rated period, with noise and thermal output governed by the projector's own cooling system.
Highlights
- Ready-to-install module with housing included
- 250 W UHP bulb delivers 2,000 hours rated life
- OEM-sourced from Philips Osram Ushio Phoenix Iwasaki Matsushita
- Each unit tested for beam ignition voltage and run-time
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | BenQ |
|---|---|
| Type | Projector Lamp |
| Wattage | 250W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
What wattage does the PE8250 lamp draw, and how many hours is it rated for?
The lamp uses a 250 W Philips UHP bulb and is rated for 2,000 hours of operation.
Does the module come pre-assembled in its housing, or must I fit the bulb myself?
It ships as a complete module with the bulb already seated in the housing, so no separate bulb installation is required.
What is the first step when installing the lamp, and what do people often forget?
Power off and unplug the projector, then let it cool completely; the step most often skipped is waiting for the unit to cool before opening the lamp door.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



