BenQ
BenQ MX813ST OEM Replacement Projector Lamp 230W
230 W replacement lamp module with Philips UHP bulb and housing, rated 3,500 hours normal or 5,000 hours economy, ready for direct installation
- TypeProjector Lamp
- Wattage230W
- Lamp Life3,500 (Normal) - 5,000 (Economy) Hrs.
- Ready-to-install module with genuine 230W Philips UHP bulb
- Up to 5000 hours lamp life in Economy mode
- 3500 hours rated life in Normal brightness mode
- Manufactured under ISO 9001 quality standards
- Compatible replacement for BenQ MX813ST projector
BenQ MX813ST Replacement Lamp Module
This new 230 W projector lamp ships as a complete bulb-and-housing assembly ready for direct installation in the MX813ST. It uses a Philips UHP bulb and meets ISO 9001 manufacturing standards. The unit is designed to restore original brightness and colour performance without additional alignment.
Upgrade from a dim or failed original lamp
Replace the factory lamp when image brightness drops below usable levels or the projector signals end-of-life. The jump is worth it when a single module can deliver up to 3 500 hours in normal mode or 5 000 hours in economy mode. Buyers who need a lower-cost bare bulb without housing are not served by this module.
Sustained output over thousands of hours
The lamp maintains stable ignition voltage and beam consistency across the rated 3 500 to 5 000 hour range. Quality checks verify run-time performance so brightness decay follows the expected curve rather than failing early. Heavy daily users who exceed the economy rating in under a year should plan a spare.
Highlights
- Ready-to-install module with genuine 230W Philips UHP bulb
- Up to 5000 hours lamp life in Economy mode
- 3500 hours rated life in Normal brightness mode
- Manufactured under ISO 9001 quality standards
- Compatible replacement for BenQ MX813ST projector
Specifications
| Brand | BenQ |
|---|---|
| Type | Projector Lamp |
| Wattage | 230W |
| Lamp Life | 3,500 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
Does the lamp module include the housing so it fits the MX813ST without extra parts?
Yes, the lamp ships as a complete 230 W module with a new Philips UHP bulb already seated in its housing, matching BenQ part 5J.J4R05.001 for direct fit.
What is the correct order when installing the module — housing first or bulb first?
The module arrives pre-assembled; insert the whole unit into the projector lamp compartment, secure the retaining screws, then reset the lamp timer in the menu — skipping the timer reset is the common mistake.
How many hours before the 230 W lamp needs replacement in normal and economy modes?
Rated life is 3,500 hours in normal mode and 5,000 hours in economy mode; plan replacement when brightness drops or the projector warning appears.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



