BenQ
BenQ MW526 Projector Lamp 190W 4500 hrs
Replacement lamp module with a 190W UHP bulb rated for 4500 hours of use
- TypeUHP
- Wattage190W
- Lamp Life4,500 hrs
- OEM Philips 190W bulb ensures original brightness
- 4500-hour lamp life reduces replacement frequency
- Fully assembled housing allows immediate installation
- ISO 9001 manufacturing guarantees consistent quality
- BenQ 5J.J9R05.001 compatibility assures exact fit
BenQ MW526 190W UHP Lamp
The BenQ MW526 is a new replacement lamp module rated at 190W with a 4,500-hour service life. It ships as a fully assembled bulb and housing for direct installation in compatible BenQ projectors. The module uses a Philips UHP bulb and meets ISO 9001 manufacturing standards.
Replaces a dim or expired original lamp
Swap it in when the existing lamp reaches its rated hours or when image brightness drops below usable levels. The jump is worth it if the projector is otherwise functional and a new lamp restores full output for a fraction of a replacement unit cost.
Suits owners of BenQ projectors using the MW526
Buyers needing a different wattage, connector, or form factor should look elsewhere. The lamp is not universal and will not fit projectors that require a different module specification.
Highlights
- OEM Philips 190W bulb ensures original brightness
- 4500-hour lamp life reduces replacement frequency
- Fully assembled housing allows immediate installation
- ISO 9001 manufacturing guarantees consistent quality
- BenQ 5J.J9R05.001 compatibility assures exact fit
Specifications
| Brand | BenQ |
|---|---|
| Type | UHP |
| Wattage | 190W |
| Lamp Life | 4,500 hrs |
Questions about this item
Does the MW526 lamp module include the housing so it fits straight into the projector?
Yes, the module is supplied as a fully assembled bulb and housing that matches the original 5J.J9R05.001 form factor for direct installation.
What is the correct sequence for installing the 190 W lamp, and which step do users most often miss?
Power off and unplug the projector, let it cool, remove the lamp cover, release the securing screws, slide the old module out, insert the new one until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp timer in the menu — the timer reset is the step most frequently forgotten.
After roughly 4 500 hours of use, what part will need replacement and how is it identified?
The UHP bulb inside the housing reaches its rated life; the projector will display a replacement warning and brightness will drop, signalling that the entire lamp module should be swapped for a new 5J.J9R05.001 unit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



