BenQ
BenQ MW51 Projector Lamp 190W 5.001
A 190W replacement lamp module with Philips UHP bulb and housing, ready for easy installation in BenQ projectors
- TypeProjector Lamp
- Wattage190W
- Lamp Life4,500 (Normal) - 6,000 (Economy) Hrs.
- Ready to install with pre-assembled housing
- 190W UHP bulb delivers bright projection
- Up to 6,000 hours lamp life in economy mode
- 4,500 hours rated life in normal mode
- Built to ISO 9001 quality standards
Ready-to-install 190 W lamp module
This replacement lamp ships as a fully assembled bulb and housing designed for the BenQ MW51 projector. It uses a Philips UHP 190 W bulb and is manufactured to ISO 9001 quality standards. The unit arrives new and ready for immediate installation without extra tools or alignment steps.
Suits owners needing a direct OEM-spec replacement
It matches the original 190 W specification and rated life, so brightness and colour stay consistent after the swap. Buyers who want a lower-wattage lamp for reduced heat or a higher-output module for larger venues should look at a different projector model because this unit is fixed at 190 W and the MW51 form factor.
Rated 4 500 hours normal or 6 000 hours economy
In normal mode the lamp delivers roughly 4 500 hours of use before brightness drops to half; economy mode stretches that to about 6 000 hours. Heavy daily presentation schedules will reach the limit faster than occasional classroom use, so plan a spare module once the counter approaches the rated threshold.
Highlights
- Ready to install with pre-assembled housing
- 190W UHP bulb delivers bright projection
- Up to 6,000 hours lamp life in economy mode
- 4,500 hours rated life in normal mode
- Built to ISO 9001 quality standards
Specifications
| Brand | BenQ |
|---|---|
| Type | Projector Lamp |
| Wattage | 190W |
| Lamp Life | 4,500 (Normal) - 6,000 (Economy) Hrs. |
Questions about this item
Which BenQ projectors accept the 5.001 lamp module?
The 5.001 lamp module is built for the BenQ MW51 projector; it includes the complete housing and a Philips 190W UHP bulb for direct replacement.
Does the 190W lamp run on the same power supply as the original MW51 lamp?
Yes, the replacement draws the same 190W as the factory lamp, so the projector's existing power supply and ballast operate without change.
How do I confirm the new lamp is performing correctly after installation?
Reset the projector's lamp-hour counter, then verify the menu shows zero hours and the image reaches full brightness in Normal or Economy mode.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



