We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
BenQ MP711 projector lamp module with 280W bulb in housing

BenQ

BenQ MP711 Projector Lamp 280W

SKU CH-JCZ0-T0P0Z

A 280 W replacement lamp module with Philips P-VIP bulb and housing, rated 3,000 hours normal or 4,000 hours economy

  • TypeProjector Lamp
  • Wattage280W
  • Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
  • Genuine Philips P-VIP bulb delivers reliable brightness
  • 280W power matches original projector specifications
  • 3,000 hours normal life extends replacement intervals
  • 4,000 hours economy mode reduces operating cost
  • Pre-assembled housing enables quick tool-free installation

Ready-to-fit 280W lamp module

This BenQ MP711 replacement lamp ships as a complete bulb-and-housing assembly rated at 280W. It is designed for owners of compatible BenQ projectors who need a straightforward, new light source without separate component handling. The unit arrives ready to install, matching the original form factor for direct swap-in.

Simple swap, watch the hour counter

Installation requires opening the projector lamp door, removing the old module and sliding the new one into place until it seats firmly. The most common issue is forgetting to reset the lamp-hour counter in the projector menu after replacement, which can leave the replacement warning active and prevent accurate life tracking.

Verify exact projector model first

Before ordering, confirm that your projector’s service documentation lists the MP711 or part number 5J.06W01.001 as the correct lamp. BenQ uses similar-looking modules across several series, and fitting the wrong one can cause ignition failure or physical mismatch. Check the label on your existing lamp or the projector’s specifications sheet to ensure compatibility.

Highlights

  • Genuine Philips P-VIP bulb delivers reliable brightness
  • 280W power matches original projector specifications
  • 3,000 hours normal life extends replacement intervals
  • 4,000 hours economy mode reduces operating cost
  • Pre-assembled housing enables quick tool-free installation

Specifications

BrandBenQ
TypeProjector Lamp
Wattage280W
Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.

Questions about this item

How do I confirm the 280W P-VIP bulb is operating correctly after installing the MP711 lamp module?

Power on the projector and verify the lamp indicator shows normal status; the module should reach full brightness within the warm-up period and run without flickering or shutdown for the rated 3,000 normal or 4,000 economy hours.

What components are included with the BenQ MP711 lamp and what must I source separately?

The module ships as a fully assembled 280W Philips P-VIP bulb inside its housing, ready to install; no additional parts are required for the lamp itself.

Which version of the MP711 lamp should I choose among the OEM and compatible options?

Select the OEM version from the original bulb manufacturer for exact factory performance, the BenQ-sold OEM for brand-matched support, another OEM version for equivalent specs, or the compatible version for a lower-cost alternative built with genuine OEM parts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.