BenQ
BenQ MP620 projector lamp 200W 3000 4000 hrs
Genuine 200W UHP replacement lamp module with housing, rated 3000 hours normal or 4000 hours economy for BenQ projectors
- TypeProjector Lamp
- Wattage200W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Genuine Philips UHP 200W bulb inside
- Ready-to-install housing for quick replacement
- 3000 hours normal, 4000 hours economy life
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time
Ready-to-install 200W lamp module
This BenQ MP620 replacement lamp ships as a complete 200W UHP bulb inside its housing. The assembly arrives fully assembled so the projector can be back in service without handling bare lamps. Rated life is 3,000 hours in normal mode and 4,000 hours in economy mode. The unit is manufactured to ISO 9001 quality standards.
Direct-fit housing for supported BenQ models
The module uses the exact housing design specified for the MP620 projector series. Alignment tabs and the connector layout match the original equipment, allowing a straight swap without tools or adapter cables. A genuine Philips UHP bulb provides the light source inside that housing. Each unit passes beam performance, ignition voltage and run-time checks before it leaves the factory.
Verify projector model and lamp timer reset
Confirm the projector is a BenQ model that accepts the MP620 lamp module before ordering. The lamp timer inside the projector must be reset after installation so the hour counter reflects the new 3,000 to 4,000 hour rating. This lamp is not for users who need a bare bulb without housing or a different wattage rating.
Highlights
- Genuine Philips UHP 200W bulb inside
- Ready-to-install housing for quick replacement
- 3000 hours normal, 4000 hours economy life
- Manufactured to ISO 9001 quality standards
- Tested for beam performance, ignition and run-time
Specifications
| Brand | BenQ |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
What wattage bulb does the MP620 lamp module use?
The module ships with a 200W Philips UHP bulb already seated in the housing.
Which BenQ projectors accept the MP620 lamp housing?
The housing matches the BenQ part number 5J.J1S01.001; verify that code on your projector before ordering.
How do you reset the lamp timer after fitting the MP620 module?
After installation, open the projector menu and select the lamp-reset option so the 3000 or 4000 hour counter starts from zero.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



