BenQ
BenQ 5J.Y1E05.001 OEM Replacement Projector Lamp 200W
Genuine 200W UHP replacement lamp module with housing, rated 3,000 normal or 4,000 economy hours, ready to install in compatible BenQ projectors
- TypeProjector Lamp
- Wattage200W
- Lamp Life3,000 (Normal) - 4,000 (Economy) Hrs.
- Genuine OEM Philips UHP 200W bulb for reliable brightness
- Pre-assembled housing enables quick drop-in installation
- 3000 hours normal / 4000 hours economy lamp life
- Manufactured to ISO 9001 quality standards
- Tested for beam performance ignition voltage and run-time
Direct replacement module
This BenQ 5J.Y1E05.001 lamp module ships as a fully assembled bulb and housing, ready for tool-free installation in compatible BenQ projectors. It uses a Philips UHP 200W bulb manufactured to ISO9001 quality standards. The unit is supplied new and covers the original equipment specification for the listed part number.
Restores original brightness
Replacing a dimmed or expired lamp returns the projector to its factory light output and colour balance. The move is worth it when image quality has dropped below usable levels or when the projector warning indicates end of life. No other component changes are required for the swap.
Rated 3000 to 4000 hours
In normal mode the lamp is rated for 3000 hours of operation; economy mode extends the rating to 4000 hours. Actual runtime varies with usage patterns, ambient temperature and power cycling frequency. Heavy daily use in normal mode will reach the limit sooner than occasional economy-mode sessions.
Highlights
- Genuine OEM Philips UHP 200W bulb for reliable brightness
- Pre-assembled housing enables quick drop-in installation
- 3000 hours normal / 4000 hours economy lamp life
- Manufactured to ISO 9001 quality standards
- Tested for beam performance ignition voltage and run-time
Specifications
| Brand | BenQ |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 3,000 (Normal) - 4,000 (Economy) Hrs. |
Questions about this item
Which BenQ projectors accept the 5J.Y1E05.001 lamp module?
The 5J.Y1E05.001 is a direct replacement for the original lamp shipped with compatible BenQ projectors; check your projector manual for the exact model match.
What is the correct way to seat the 200W UHP lamp housing, and what step do users often miss?
Power off and cool the projector, remove the lamp cover, slide the new housing in until it clicks, then secure the screw and reset the lamp timer in the menu.
When should the 5J.Y1E05.001 lamp be replaced based on its rated life?
The lamp is rated for 3000 hours in Normal mode and 4000 hours in Economy mode; replace it when brightness drops or the projector warns that the limit is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



