BenQ
BenQ 5J.J7K05.001 Projector Lamp 210W
Genuine 210W UHP lamp module with 4,000 to 6,500 hour life for BenQ projectors
- TypeProjector Lamp
- Wattage210W
- Lamp Life4,000 (Normal) - 6,500 (Economy) Hrs.
- Ready to install with pre-assembled bulb and housing
- 210W UHP lamp delivers bright projection
- Up to 4000 hours normal lamp life
- Extended 6500 hours in economy mode
- Manufactured to ISO 9001 quality standards
BenQ 5J.J7K05.001 210W Replacement Lamp
This new BenQ 5J.J7K05.001 module combines a 210W Philips UHP bulb with its housing for direct installation. It delivers up to 4,000 hours of life in normal mode and 6,500 hours in economy mode. The assembly arrives ready to fit without extra tools.
Suits BenQ owners needing a direct 210W swap
It suits users whose projector requires the exact 5J.J7K05.001 part number and 210W rating. Buyers with different BenQ models or other brands should verify their required part code first. Projectors needing a higher or lower wattage lamp cannot use this module.
210W Philips UHP bulb determines fit and output
The 210W Philips UHP bulb sets the brightness and runtime you will get from the projector. Confirm the 5J.J7K05.001 code matches your unit before ordering. No other specification overrides this wattage and part-number match.
Highlights
- Ready to install with pre-assembled bulb and housing
- 210W UHP lamp delivers bright projection
- Up to 4000 hours normal lamp life
- Extended 6500 hours in economy mode
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | BenQ |
|---|---|
| Type | Projector Lamp |
| Wattage | 210W |
| Lamp Life | 4,000 (Normal) - 6,500 (Economy) Hrs. |
Questions about this item
Which BenQ projector models accept the 5J.J7K05.001 lamp module?
The 5J.J7K05.001 is a direct replacement module for BenQ projectors that shipped with this part number; check your projector's manual or the label inside the lamp door to confirm compatibility.
Will the 210 W UHP lamp operate normally in a projector that previously used a lower-wattage module?
No, the projector's power supply and cooling are calibrated for a specific wattage; only install the 5J.J7K05.001 in a model that originally uses a 210 W lamp.
How can I verify the lamp is performing correctly after installation?
Reset the lamp-hour counter in the projector menu, then confirm the projector reports 0 hours and the image reaches full brightness without flicker or error messages.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



