BENESTON
BENESTON VCF-1003DA-P 3G-SDI 1-to-3 Distribution Amplifier video capturing device
Splits one SD, HD or 3G-SDI input into three outputs with re-clocking and cable equalisation, supporting 1080p and 720p at 270 Mbps, 1.485 Gbps and 2.97 Gbps
- Distributes one SDI signal to three outputs
- Supports SD, HD and 3G-SDI standards up to 1080p
- Built-in equalizer, re-clocker and driver extend cable reach
- Runs SD-SDI up to 150 m, HD-SDI 120 m, 3G-SDI 100 m
- Embedded ESD protection and audio pass-through included
1-to-3 3G-SDI Distribution Amplifier
The Beneston VCF-1003DA-P accepts one SD, HD or 3G-SDI input and delivers three identical outputs. It is built for broadcast engineers, live-event crews and AV installers who need to split a single camera or switcher feed to multiple recorders, monitors or streaming encoders.
Signal rates and cable reach
The unit handles SD-SDI at 270 Mbps, HD-SDI at 1.485 Gbps and 3G-SDI at 2.97 Gbps. Built-in equalisation, re-clocking and cable driving extend reliable transmission to 150 m for SD-SDI, 120 m for HD-SDI and 100 m for 3G-SDI while suppressing jitter.
Power and format checks
Verify that the included power adapter matches your local mains voltage before connecting. Confirm that your source and destination equipment operate at one of the supported SDI standards and that cable runs stay within the specified distance limits for the chosen signal rate.
Highlights
- Distributes one SDI signal to three outputs
- Supports SD, HD and 3G-SDI standards up to 1080p
- Built-in equalizer, re-clocker and driver extend cable reach
- Runs SD-SDI up to 150 m, HD-SDI 120 m, 3G-SDI 100 m
- Embedded ESD protection and audio pass-through included
Specifications
| Brand | BENESTON |
|---|---|
| Model | VCF-1003DA-P |
Questions about this item
Should I pick the SD-SDI, HD-SDI or 3G-SDI mode for my camera?
The unit auto-detects the incoming standard — SD-SDI at 270 Mbps, HD-SDI at 1.485 Gbps or 3G-SDI at 2.97 Gbps — and re-clocks it to three identical outputs, so you simply connect and it matches the source.
What does the 3G-SDI 2.97 Gbps rating mean when the signal reaches my monitors?
It delivers a 1080p or 720p picture over each of the three outputs with re-clocking that removes jitter, and the built-in cable driver holds the signal intact for up to 100 metres on 3G-SDI coax.
How far can I run the coaxial cables on the three outputs?
Maximum reliable distances are 150 metres for SD-SDI, 120 metres for HD-SDI and 100 metres for 3G-SDI, thanks to the integrated equaliser and cable driver on every output.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



