Accsoon
Accsoon CineView SE Multi-Spectrum Wireless Video Transmitter 1200ft 1080p HDMI SDI
$181.99
0.00215342BTC
In stock
BENESTON
BENESTON VCF-005T 12G-SDI to HDMI Video Capturing Device
Converts 12G-SDI to HDMI at 3840 x 2160p 60 with 59.94 support, embedded audio and loop-out
- Converts 12G-SDI to HDMI for broadcast workflows
- Handles 3840 x 2160 at 60 Hz input and output
- 12 Gbps bandwidth carries 59.94 fps signals
- HDCP 2.2 and 1.4 support protects content
- Embeds SDI audio into HDMI with loop-out retained
12G-SDI to HDMI video converter
The BENESTON VCF-005T converts a 12G-SDI broadcast signal to HDMI for monitoring or recording. It accepts SDI input resolutions up to 3840x2160 at 60Hz and 59.94Hz. The unit provides a single SDI loop-out to pass the source signal further down the chain. It is intended for broadcast engineers and streaming setups that need format translation without scaling.
Passive operation with external 12 V supply
The converter ships with a DC12V/2A power adapter that must be connected for reliable operation. No active cooling is described, so the device runs silently in a rack or on a desk. Power draw is limited to the included supply rating, keeping thermal load low during continuous 12Gbps throughput. HDCP 2.2 and 1.4 compliance is maintained across the conversion path.
Embedded audio and loop-through simplify wiring
Audio embedded in the SDI stream is automatically carried to the HDMI output, eliminating a separate audio extractor. The single SDI loop-out frees a distribution amplifier port for downstream devices. Only the supplied power adapter and standard SDI and HDMI cables are required to integrate the unit into an existing 12G, 6G, 3G or HD-SDI workflow.
Highlights
- Converts 12G-SDI to HDMI for broadcast workflows
- Handles 3840 x 2160 at 60 Hz input and output
- 12 Gbps bandwidth carries 59.94 fps signals
- HDCP 2.2 and 1.4 support protects content
- Embeds SDI audio into HDMI with loop-out retained
Specifications
| Brand | BENESTON |
|---|---|
| Model | VCF-005T |
Questions about this item
How do I install the BENESTON VCF-005T and which connection step is often missed?
Connect the included DC12V/2A power adapter first, then link the 12G-SDI source to the input and the HDMI display to the output; the step most often missed is powering the unit before signal connection.
What maintenance or replacement will the BENESTON VCF-005T need over time?
The device has no user-serviceable parts; only the external DC12V/2A power adapter may require replacement if it fails after extended use.
What limit appears first during sustained 3840x2160p 60 capture on the BENESTON VCF-005T?
The 12Gbps bandwidth ceiling is the first hard limit; sustained 3840x2160p 60 at 59.94 Hz stays within it, but any higher bit-rate signal would be truncated.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
