We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fibre cable with LC and SC connectors 6.56 ft

Belkin

Belkin F2F402L7-02M-G fibre optic cable 6.56 ft LC/SC 50/125 10GB Aqua

SKU CH-F2G7-C8WE1 MPN F2F402L7-02M-G

A 6.56 ft aqua multimode duplex cable with LC and SC connectors for 10 Gigabit links over 50/125 µm fibre

  • TypeFiber Optic
  • ColorAqua
  • Length6.56 ft
  • Connector Number1
  • Connector DetailConnector on First End:2 x LC Male Connector on Second End:2
  • FeaturesBelkin's 10GB Aqua Fiber Optic Cables are backward-compatibl
  • 10 Gigabit bandwidth supported by 50/125 µm multimode fibre
  • Backward-compatible with existing 62.5/125 µm network equipment
  • LC connectors on one end, SC connectors on the other
  • Aqua jacket identifies 10 GbE multimode cable at a glance
  • 56 ft length suits rack-to-rack or patch-panel connections

Duplex multimode fibre cable

This duplex multimode fibre cable carries two fibres terminated with LC male connectors on one end and SC male connectors on the other. The 50/125 µm core/cladding and aqua jacket identify it as laser-optimised OM3 cable rated for 10 Gbit/s transmission. It suits installers linking patch panels, switches or transceivers that require mixed LC and SC interfaces.

Who it suits and who should look elsewhere

Network technicians needing a short, pre-terminated LC-to-SC patch lead for 10 Gbit/s multimode links will find the 6.56 ft length convenient for rack-to-rack or panel-to-equipment connections. Buyers who require single-mode fibre, longer reach, different connector polishes, or higher fibre counts cannot use this cable.

Deciding specification: 50/125 µm core/cladding

The 50/125 µm core/cladding dimension determines whether this cable matches the installed multimode infrastructure; it is the single figure that decides compatibility with existing OM3 or OM4 cabling and 10 Gbit/s transceivers.

Highlights

  • 10 Gigabit bandwidth supported by 50/125 µm multimode fibre
  • Backward-compatible with existing 62.5/125 µm network equipment
  • LC connectors on one end, SC connectors on the other
  • Aqua jacket identifies 10 GbE multimode cable at a glance
  • 56 ft length suits rack-to-rack or patch-panel connections

Specifications

BrandBelkin
ModelF2F402L7-02M-G
TypeFiber Optic
ColorAqua
Length6.56 ft
Connector Number1
Connector DetailConnector on First End:2 x LC Male
Connector on Second End:2 x SC Male
FeaturesBelkin's 10GB Aqua Fiber Optic Cables are backward-compatible with existing network equipment and provide close to triple the bandwidth of traditional 62.5/125 multimode fiber. 10 Gigabit is rated for distances of up to 300 meters using 850nm Vertical Cavity Surface Emitting Lasers (VCSELs).
Shipping weight0.05 kg
Package size201 × 157 × 23 mm

Questions about this item

What connector types are on each end of this Belkin F2F402L7-02M-G cable?

One end has two LC male connectors and the other end has two SC male connectors for duplex multimode connections.

How do I correctly orient the duplex LC and SC connectors when plugging them in?

Each connector is keyed; align the ridge with the port slot and push straight in until it clicks — forcing it backwards can damage the ferrule.

When should I consider replacing this 50/125 µm multimode cable?

Replace it if insertion loss exceeds the 20 dB specification, the aqua jacket shows cracks, or connectors become loose after repeated mating cycles.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.