We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular lithium-ion battery pack with label showing SP307 90Wh 7800mAh 11.55V

Beisite

Beisite SP307 90Wh 7800mAh 11.55V Battery for Siemens Simatic 31CP8/49/64-2

SKU CH-108P-7T7TK

A 11.55 V, 90 Wh lithium-ion replacement battery for Siemens Simatic programmer CNC systems 31CP8, 49 and 64-2

  • ColorBlack
  • TypeBattery
  • CompatibilityFor Siemens Simatic Programmer CNC System
  • Battery TypeLithium-Ion
  • Battery Voltage11.55V
  • Battery Capacity90Wh/7800mAh
  • 90 Wh capacity powers long CNC programming sessions
  • 7800 mAh lithium-ion cell delivers stable 11.55 V output
  • Direct replacement for Siemens Simatic part 31CP8/49/64-2
  • Black finish matches original programmer enclosure
  • New battery includes SP307 and 31CP8/49/64-2 cross-reference

Direct replacement for Siemens Simatic CNC

This new lithium-ion battery matches the SP307 and 31CP8/49/64-2 part numbers for Siemens Simatic programmer CNC systems. It delivers 11.55 volts and a 90Wh, 7800mAh capacity in a black housing. The pack is built to restore mobile power to the original industrial controller. It is not for users who need a different voltage or connector layout.

Swaps out the original SP307 pack when runtime drops

The unit replaces the factory battery carrying part numbers SP307 and 31CP8/49/64-2. The change is worth it when the existing cell no longer holds enough charge for a full shift or shows swelling. No other part numbers or chemistries are supported by this model. It is not for technicians servicing non-Simatic hardware or newer controller revisions with different pinouts.

Steady 11.55 V output through the full discharge

Lithium-ion chemistry maintains the rated voltage across the 90Wh capacity without the sharp sag seen in aged packs. The 7800mAh rating reflects sustained delivery rather than a brief peak. Performance stays consistent until the protection circuit cuts off at the safe lower limit. It is not for applications that demand hot-swap capability or redundant cell arrays.

Highlights

  • 90 Wh capacity powers long CNC programming sessions
  • 7800 mAh lithium-ion cell delivers stable 11.55 V output
  • Direct replacement for Siemens Simatic part 31CP8/49/64-2
  • Black finish matches original programmer enclosure
  • New battery includes SP307 and 31CP8/49/64-2 cross-reference

Specifications

BrandSP307
ModelSP307
Part Number31CP8/49/64-2
ColorBlack
TypeBattery
CompatibilityFor Siemens Simatic Programmer CNC System
Battery TypeLithium-Ion
Battery Voltage11.55V
Battery Capacity90Wh/7800mAh

Questions about this item

What are the exact part numbers this SP307 battery replaces in the Siemens Simatic 31CP8/49/64-2?

This battery replaces part numbers SP307 and 31CP8/49/64-2 for the Siemens Simatic Programmer CNC System.

How is the battery installed in the Siemens Simatic programmer, and what step is often missed?

Power off the CNC system, open the battery compartment, disconnect the old pack, connect the new SP307 matching the polarity, then secure the cover before powering on.

What indicates the lithium-ion pack needs replacement in the Siemens Simatic 31CP8/49/64-2?

Replace the pack when the CNC system loses date, time or program memory after power-off, showing the 11.55V cell no longer holds sufficient charge.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.