We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black lithium-ion battery pack for portable patient monitors

Beisite

Beisite ME202EK 11V 86.58Wh 7.8Ah laptop battery

SKU CH-MG7H-J3N7F

Replacement lithium-ion battery delivering 11 V and 86.58 Wh for Molicel VM and VS series patient monitors

  • ColorBlack
  • TypeBattery
  • CompatibilityFor Molicel VM3 VM4 VM6 VM8 VS2 VS3 VS4 Portable Patient Mon
  • Battery TypeLithium-Ion
  • Battery Voltage11.V
  • Battery Capacity86.58Wh/7.8Ah
  • Ready for Molicel VM and VS monitors
  • 58Wh lithium-ion cell provides long run-time
  • 11V output matches original specification
  • Replaces ME202, ME202C, ME202EK, 31CR19/66-3
  • Brand-new black battery ships in single pack

Direct Replacement for Molicel Monitors

The Beisite ME202EK is a lithium-ion battery built to replace part numbers ME202, ME202C, ME202EK and 31CR19/66-3. It fits Molicel VM3, VM4, VM6, VM8, VS2, VS3 and VS4 portable patient monitors. The pack ships new in black and contains one battery unit. It is not for users who need a different voltage or connector layout.

Steady Output During Long Shifts

Rated at 11 V with a capacity of 86.58 Wh and 7.8 Ah, the cell chemistry is designed to maintain voltage through extended monitoring sessions rather than only brief peaks. Internal protection circuitry manages charge and discharge cycles to keep output stable across the full usable range. It is not for applications that demand higher watt-hour ratings or faster recharge rates.

Low Heat and Silent Operation

Lithium-ion construction produces minimal heat during normal discharge, so the monitor enclosure stays cool without active cooling. No moving parts mean completely silent running in clinical environments. Power draw follows the monitor's own load profile, drawing only what the device requires. It is not for systems that require hot-swap capability or external charging cradles.

Highlights

  • Ready for Molicel VM and VS monitors
  • 58Wh lithium-ion cell provides long run-time
  • 11V output matches original specification
  • Replaces ME202, ME202C, ME202EK, 31CR19/66-3
  • Brand-new black battery ships in single pack

Specifications

BrandME202EK
ModelME202EK
Part NumberME202EK
ColorBlack
TypeBattery
CompatibilityFor Molicel VM3 VM4 VM6 VM8 VS2 VS3 VS4 Portable Patient Monitor Battery
Battery TypeLithium-Ion
Battery Voltage11.V
Battery Capacity86.58Wh/7.8Ah

Questions about this item

Does the 11 V lithium-ion cell generate noticeable heat when the monitor runs all day?

The 11 V lithium-ion chemistry runs cool under continuous load; no active cooling is required inside the patient monitor.

Which original part numbers must my Molicel monitor already use for this ME202EK to fit?

It replaces ME202, ME202C, ME202EK and 31CR19/66-3, so your device should list one of those codes.

Will the 7.8 Ah capacity work with older VM3 and VS2 units without firmware changes?

Yes, the 7.8 Ah pack is a direct drop-in for VM3, VM4, VM6, VM8, VS2, VS3 and VS4 monitors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.