Beisite
Beisite BAT 3S1P 3IFR19/66 9.6V 10.6Wh laptop battery
9.6 V lithium-ion replacement battery for IBM E5424 and E5460 controllers, 10.6 Wh capacity
- ColorBlack
- TypeBattery
- Compatibilityfor IBM 00W1118 X-48619-00-R6 E5424 E5460 Controller Battery
- Battery TypeLithium-Ion
- Battery Voltage9.6V
- Battery Capacity10.6Wh/1.1Ah
- Reliable power for IBM controllers with 9.6V 10.6Wh lithium-ion cell
- Direct replacement for part numbers 00W1118, X-48619-00-R6 and 3IFR19/66
- Compatible with IBM E5424 and E5460 controller batteries
- New condition battery ready for immediate installation
- 1Ah capacity supports extended controller operation
Direct replacement for IBM controller modules
This 9.6 V lithium-ion pack is built to replace the 00W1118, X-48619-00-R6, P43543-10-A and A100056 part numbers used in E5424 and E5460 controller units. It supplies 10.6 Wh of capacity in a black housing and arrives new and ready for installation.
Low self-discharge chemistry runs cool in standby
The lithium-ion cells maintain voltage with minimal heat during normal controller operation and hold charge over long idle periods without active cooling. No fan or heatsink is required and power draw stays within the original 1.1 Ah design envelope.
Single-unit package keeps the swap simple
The box contains only the battery itself — no cables, brackets, firmware discs or diagnostic software. Installers reuse the existing connector and mounting points so the controller returns to service without extra parts or configuration steps.
Highlights
- Reliable power for IBM controllers with 9.6V 10.6Wh lithium-ion cell
- Direct replacement for part numbers 00W1118, X-48619-00-R6 and 3IFR19/66
- Compatible with IBM E5424 and E5460 controller batteries
- New condition battery ready for immediate installation
- 1Ah capacity supports extended controller operation
Specifications
| Brand | BAT 3S1P |
|---|---|
| Model | BAT 3S1P |
| Part Number | 3IFR19/66 |
| Color | Black |
| Type | Battery |
| Compatibility | for IBM 00W1118 X-48619-00-R6 E5424 E5460 Controller Battery |
| Battery Type | Lithium-Ion |
| Battery Voltage | 9.6V |
| Battery Capacity | 10.6Wh/1.1Ah |
Questions about this item
How do I install the 9.6V 10.6Wh controller battery in the E5424 or E5460, and which step is often missed?
Power down the server, open the chassis, locate the controller card, unplug the old 3IFR19/66 pack, insert the new BAT 3S1P unit, and reconnect the lead; the step most often missed is reseating the connector fully so the latch clicks.
What maintenance or replacement will the 1.1Ah lithium-ion pack need over time?
The 9.6V 10.6Wh cell is sealed and maintenance-free; plan to replace the whole BAT 3S1P unit once runtime drops below the needs of the E5424 or E5460 controller, typically after several years of continuous use.
What limit appears first when the 10.6Wh battery runs under sustained controller load?
The 1.1Ah capacity sets the runtime ceiling; under constant draw the 9.6V pack will exhaust its 10.6Wh reserve before any thermal or voltage threshold is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



