We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BEIEBIJOB Self-Adhesive Floor Cord Cover 10ft Black

SKU CH-X87E-71DHF

A 10 ft self-adhesive PVC channel with a 0.61 by 0.32 inch inner cavity hides multiple cables and withstands foot traffic

  • Product nameBEIEBIJOB
  • location/usageSelf-Adhesive
  • warranty12 months
  • finishBlack
  • styleContemporary
  • weight0.649 kilograms
  • Hides cables fast with 30-second peel-and-stick adhesive
  • Fits multiple wires in 0.61 by 0.32 inch channel
  • Bends around corners without heat using flexible PVC
  • Stands up to chairs and vacuums with heavy-duty build
  • Removes cleanly after 24-hour cure leaving no residue

Self-Adhesive Floor Cord Cover 10ft

This self-adhesive floor cord cover runs 10 feet and uses heavy-duty PVC to protect cables from foot traffic, rolling chairs, and vacuum cleaners. The black finish suits contemporary interiors while hiding wires on hardwood, tile, carpet, or wall edges. It is designed for indoor use where a low-profile cable management solution is needed. Buyers who need longer continuous runs or multiple colour-matched sections will not find those options here.

Inner Channel Limits 0.61in by 0.32in

The inner channel measures 0.61 inches wide by 0.32 inches high, so every cable must stay under 0.32 inches in diameter or height. Cables thicker than this limit will not fit, and stacking multiple thick cords may exceed the channel capacity. The cover bends around corners without heat and can be cut with scissors for custom lengths. Installers who need to route larger power cables or conduit should look elsewhere.

Peel-and-Stick Adhesive with 24-Hour Cure

A peel-and-stick backing bonds to hardwood, tile, carpet, or wall edges in seconds, but maximum grip requires avoiding repositioning for 24 hours. Removal is non-destructive and leaves no residue on floors. The adhesive is not rated for wet areas, outdoor exposure, or surfaces with heavy dust or oil. Users who need a mechanical fastening option or a reusable mounting method will not be served by this design.

Highlights

  • Hides cables fast with 30-second peel-and-stick adhesive
  • Fits multiple wires in 0.61 by 0.32 inch channel
  • Bends around corners without heat using flexible PVC
  • Stands up to chairs and vacuums with heavy-duty build
  • Removes cleanly after 24-hour cure leaving no residue

Specifications

BrandBEIEBIJOB
Product nameBEIEBIJOB
location/usageSelf-Adhesive
warranty12 months
finishBlack
styleContemporary
weight0.649 kilograms
descriptionBEIEBIJOB, Black, Self-Adhesive, 10 feet, 120 L x 0.4 W x 0.1 H inches, 10
featuresSelf-Adhesive, Black, 10 feet, BEIEBIJOB
size dimensions120 in x 0.4 in x 0.1 in
length120 inches

Questions about this item

Which colour and length option should I pick for a single run along a hallway?

The listing shows a 10ft roll in Black; other colours such as White, Brown, Gray, Yellow Wood, Walnut Wood and Gray Wood are also offered in the same 10ft length with self-adhesive backing.

How many cables fit inside the 0.61" by 0.32" channel in everyday use?

The inner channel measures 0.61" wide by 0.32" high, so any cable with a diameter below 0.32" will sit flat; you can run several thin cords side by side as long as the total bundle stays under that height.

What does the self-adhesive backing stick to and how long before it reaches full grip?

The peel-and-stick layer bonds to hardwood, tile, carpet or wall edges; press firmly and avoid repositioning for 24hrs to achieve maximum hold.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.