We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel pipe nipple with black anodized finish, 10 inches long

Beck C. H.

Beck C. H. Pipe Nipple Steel 1/8 NPTxNPT 10in 0330004003

SKU CH-73NK-96PCM

A 10-inch steel pipe nipple with 1/8 NPT threads rated for 300 psi at 150 degrees Fahrenheit

  • ColorTransparent
  • Rated for 300 psi at 150°F air, gas and oil lines
  • Withstands 150 psi steam at 360°F for high-temperature service
  • Welded Grade B steel construction ensures leak-free durability
  • 10-inch length provides flexible reach in tight plumbing runs
  • 1/8 NPT threads on both ends for standard pipe connections

Steel Pipe Nipple 1/8 NPT 10in

The Beck C. H. pipe nipple is a welded steel fitting with male NPT threads on both ends, intended for air, gases, non-potable water and oils in industrial and workshop plumbing. It is built for installers who need a straight 10-inch connector rated to 300 psi at 150 Degrees F.

Pressure and Temperature Limits

Maximum operating pressure is 300 psi at 150 Degrees F, while steam service is limited to 150 psi at 360 Degrees F; the black anodized finish protects the Grade B steel but the fitting is not rated for potable water systems.

Replaces Shorter or Lower-Rated Nipples

This 10-inch length replaces shorter nipples when extra reach is required between components, and its 300 psi rating upgrades from lighter-duty fittings that cannot handle the same pressure at elevated temperature.

Highlights

  • Rated for 300 psi at 150°F air, gas and oil lines
  • Withstands 150 psi steam at 360°F for high-temperature service
  • Welded Grade B steel construction ensures leak-free durability
  • 10-inch length provides flexible reach in tight plumbing runs
  • 1/8 NPT threads on both ends for standard pipe connections

Specifications

ColorTransparent
BrandBECK

Questions about this item

Should I choose the 10-inch length or a shorter nipple for my 1/8 NPT piping?

The 10-inch length suits runs needing that reach; cut and re-thread only if your layout demands a shorter piece.

What does the 300 psi rating mean when the pipe is installed in a live system?

It is the maximum non-shock pressure at 150 °F; design your circuit so normal pressure stays below that limit with a safety margin.

How does the 1/8 NPT thread standard limit what I can connect to this nipple?

It mates only with 1/8 NPT female ports; the taper seal requires proper thread engagement and compatible pipe dope or tape.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.