We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel pipe nipple, ten inches long, black anodised finish

Beck C. H.

Beck C. H. Pipe Nipple 10" Steel NPTxNPT 1/2

SKU CH-APQP-XJYVB

A 10-inch steel pipe nipple with NPT threads on both ends, rated for 300 psi at 150°F and 150 psi steam at 360°F

  • ColorTransparent
  • Black anodized coating resists corrosion on steel pipe
  • 300 psi pressure rating handles air, gases, oils and non-potable water
  • 150 psi steam rating at 360 degrees F for high-temp lines
  • Welded Grade B steel construction made in USA for durability
  • 1/2 inch NPT threads fit standard plumbing connections

10-Inch Steel Pipe Nipple

This 10-inch steel pipe nipple connects air, gas, non-potable water, or oil lines using NPT threads on both ends. It is manufactured in the USA from Grade B steel with a black anodized finish and a welded construction for durability in industrial plumbing applications.

1/2-Inch NPT Threaded Fitting

The fitting features a nominal pipe size of 1/2 inch with an inside diameter of 39/64 inch. It handles a maximum operating pressure of 300 psi at 150 degrees F and a maximum steam pressure of 150 psi at 360 degrees F, integrating directly into compatible threaded piping systems.

Suits Industrial Piping Installations

This nipple suits installers needing a 10-inch length of 1/2-inch steel pipe for air, gas, or oil distribution. It is not for potable water systems, applications exceeding the stated pressure and temperature ratings, or projects requiring a different nominal pipe size or thread standard.

Highlights

  • Black anodized coating resists corrosion on steel pipe
  • 300 psi pressure rating handles air, gases, oils and non-potable water
  • 150 psi steam rating at 360 degrees F for high-temp lines
  • Welded Grade B steel construction made in USA for durability
  • 1/2 inch NPT threads fit standard plumbing connections

Specifications

ColorTransparent
BrandBECK

Questions about this item

At what pressure does the 10" steel nipple reach its 300 psi limit during continuous air or gas service?

The nipple is rated for 300 psi at 150 °F for air, gases, non-potable water and oils. Exceeding this pressure under sustained use can cause joint failure or leakage.

How hot does the black anodized surface get when the line runs at 150 psi steam all day?

At the 150 psi steam rating the pipe wall sees 360 °F. The steel body and welded construction handle this temperature, but external insulation is recommended for personnel protection.

Which NPT thread sealant or tape must I already have to install this 1/2" nipple?

Standard PTFE tape or pipe dope rated for 300 psi and 360 °F is required on the 1/2" NPT threads to ensure a leak-free seal with the welded steel nipple.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.