We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short galvanized steel pipe nipple with male threads on one end

Beck C. H.

Beck C. H. 3/8" MNPT x 1-1/2" TBE Galvanized Steel Pipe Nipple Sch 40 bathware

SKU CH-62GV-9MP9E

Galvanized steel pipe nipple with 3/8" MNPT threads and 1-1/2" length for air, gas, oil and non-potable water systems

  • ColorTransparent
  • TypePipes, Valves & Fittings
  • Galvanized coating resists corrosion on air, gas, oil and steam lines
  • Schedule 40 wall handles 150 psi at 150 °F for non-potable water service
  • 3/8 in male NPT threads connect directly to compatible Schedule 40 fittings
  • Continuous-weld Grade A steel construction made in USA ensures leak-free joints
  • Compact 1-1/2 in overall length fits tight plumbing spaces

3/8" Schedule 40 Galvanized Steel Pipe Nipple

This galvanized steel nipple connects threaded components in air, gas, non-potable water, oil or steam lines. The male NPT threads on both ends suit Schedule 40 fittings. It is built for industrial and commercial piping installations. Buyers needing potable-water approved fittings should look elsewhere.

Threaded Male Ends For Direct Assembly

Each end features 3/8 inch male NPT threads that screw straight into compatible female fittings. The continuous weld construction maintains wall integrity under pressure. Installers must apply appropriate thread sealant rated for the service media. Over-tightening can distort the galvanized coating and create leak paths.

150 PSI Rating At 150 Degrees F

The nipple withstands 150 psi at elevated temperature for the listed media. Its 1/2 inch inside diameter and 43/64 inch outside diameter match Schedule 40 dimensions. Systems exceeding this pressure or temperature envelope require heavier-wall components. The 1-1/2 inch overall length offers limited make-up allowance in tight assemblies.

Highlights

  • Galvanized coating resists corrosion on air, gas, oil and steam lines
  • Schedule 40 wall handles 150 psi at 150 °F for non-potable water service
  • 3/8 in male NPT threads connect directly to compatible Schedule 40 fittings
  • Continuous-weld Grade A steel construction made in USA ensures leak-free joints
  • Compact 1-1/2 in overall length fits tight plumbing spaces

Specifications

BrandBECK
ColorTransparent
TypePipes, Valves & Fittings

Questions about this item

How can I confirm the 3/8" MNPT x 1-1/2" TBE nipple is seated correctly after installation?

After threading the male NPT ends into Schedule 40 fittings, pressure-test the joint up to 150 psi at 150 °F; a leak-free seal confirms the continuous-weld Grade A steel nipple is working as intended.

What comes with the nipple and what must I supply separately?

The box contains the single 3/8" nominal, 43/64" OD galvanized steel nipple; you must provide matching Schedule 40 female-threaded fittings, pipe sealant or tape, and any required valves or hangers.

Which version of this nipple should I choose for a 150 psi steam line?

Select the Schedule 40, Grade A steel nipple with galvanized coating — rated 150 psi at 150 °F — for air, gas, non-potable water, oil or steam service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.