Beck C. H.
Beck C. H. 2" MNPT x 5" TBE Galvanized Steel Pipe Nipple Sch 40
Galvanized steel pipe nipple with 2" male NPT threads, 5" overall length, Schedule 40 wall and 150 psi rating for air, gas, oil, steam or water service
- MaterialHAWA
- Galvanized coating resists corrosion for long service life
- Schedule 40 wall handles 150 psi at 150 °F
- 2 in NPT male threads fit standard fittings
- 5 in overall length suits tight piping runs
- Continuous weld construction ensures leak-free joints
2 inch Schedule 40 Pipe Nipple
The Beck C. H. galvanized steel nipple provides a 2 inch NPT male threaded connection on each end for joining pipe runs in air, gas, oil, steam and water systems. It is built to Schedule 40 wall thickness with a continuous weld and Grade A steel construction for standard pressure service.
Compatibility checklist before ordering
Verify that the mating fittings use 2 inch NPT female threads and are rated for the same Schedule 40 class. Confirm the 150 psi at 150 degrees F maximum operating pressure suits the intended fluid and temperature range. The overall length is 5 inches, so ensure the available space between fittings accommodates this dimension.
Thermals, noise and power in normal use
As a passive metal fitting the nipple generates no noise and draws no power during operation. The galvanized coating resists corrosion from the conveyed media, while the steel body conducts heat from hot fluids such as steam. Surface temperature will match the fluid temperature up to the rated 150 degrees F limit.
Highlights
- Galvanized coating resists corrosion for long service life
- Schedule 40 wall handles 150 psi at 150 °F
- 2 in NPT male threads fit standard fittings
- 5 in overall length suits tight piping runs
- Continuous weld construction ensures leak-free joints
Specifications
| Material | HAWA |
|---|---|
| Brand | BECK |
Questions about this item
Does the nipple come with thread sealant or gaskets, or must they be purchased separately?
The nipple is supplied as a single Schedule 40 galvanized steel piece with 2" male NPT threads; sealant tape or pipe dope is not included and must be bought separately.
How do I decide between different nominal sizes or schedules for this fitting?
This fitting is a 2" nominal size, Schedule 40 nipple with a 5" overall length; choose it when the system calls for that exact NPS and schedule rating.
What does the 150 psi rating mean when the nipple is installed in a working line?
The 150 psi maximum operating pressure applies at temperatures up to 150 °F for air, gas, oil, steam or water service in a Schedule 40 system.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
