We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, 12 inch length, threaded both ends

Beck C. H.

Beck C. H. 2" MNPT x 12" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-1BZK-47C0R

Galvanized steel Schedule 40 pipe nipple with 2-inch male NPT threads, 12-inch length, rated 150 psi at 150 °F for air, gas, oil, steam and water

  • MaterialHAWA
  • Galvanized coating resists corrosion for long service life
  • Schedule 40 wall handles 150 psi at 150 °F
  • 2 in NPT male threads connect to standard fittings
  • 12 in overall length suits common piping runs
  • Made in USA from Grade A welded steel

Galvanized steel pipe nipple for fluid lines

This 2-inch nominal Schedule 40 nipple connects air, gas, oil, steam or water systems with male NPT threads on one end and a threaded-bevel end on the other. The welded steel body carries a galvanized coating for corrosion resistance in industrial and commercial plumbing. Made in the USA from Grade A steel, it suits new installations or repairs where threaded rigid pipe is specified.

Sustained pressure rating and temperature limit

The fitting is rated for 150 psi at 150 degrees Fahrenheit, so it maintains integrity under continuous operating pressure rather than only brief test spikes. Continuous-weld construction and the Schedule 40 wall thickness support that rating across the full 12-inch length without deformation. Threaded joints stay tight through thermal cycles when installed with proper sealant and torque.

Replaces worn or corroded threaded nipples

Use this nipple to swap out a leaking, rusted or damaged 2-inch Schedule 40 nipple in existing piping. The jump is worth it when the old fitting shows galvanizing loss, thread damage or weld fatigue that could fail under the 150 psi service limit. It does not suit systems requiring flanged, grooved or press-connect joints, nor lines needing a higher pressure class or a different nominal diameter.

Highlights

  • Galvanized coating resists corrosion for long service life
  • Schedule 40 wall handles 150 psi at 150 °F
  • 2 in NPT male threads connect to standard fittings
  • 12 in overall length suits common piping runs
  • Made in USA from Grade A welded steel

Specifications

MaterialHAWA
BrandBECK

Questions about this item

Will the galvanized steel nipple handle continuous 150 psi steam service at 150 °F without overheating or leaking?

The Schedule 40 welded nipple is rated for 150 psi at 150 °F, so it is designed for continuous steam, air, gas, oil or water service at that pressure and temperature.

What thread sealant or mating fitting do I need to connect the 2 in MNPT end?

Use PTFE tape or pipe dope on the 2 in male NPT threads and mate it with a 2 in female NPT fitting such as a coupling, valve or flange.

Can I thread this nipple into an older Schedule 40 black-iron tee that has 2 in female NPT ports?

Yes, the 2 in male NPT threads match standard Schedule 40 female NPT ports, so it will engage the older tee directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.