We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, 10 inch length, threaded ends

Beck C. H.

Beck C. H. 2" MNPT x 10" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-P0X0-N3AJR

Galvanized steel Schedule 40 pipe nipple with 2" male NPT threads and 10" overall length rated for 150 psi at 150 °F

  • Galvanized coating resists corrosion for long service life
  • Schedule 40 wall rated for 150 psi at 150 °F
  • 10-inch overall length suits standard piping runs
  • 2-inch MNPT threads connect directly to female fittings
  • Continuous-weld Grade A steel made in USA

2" Schedule 40 Galvanized Steel Nipple

This 2-inch nominal pipe nipple is fabricated from Grade A steel with a continuous weld and a galvanized coating. It is designed for air, gas, non-potable water, oil, and steam distribution in industrial and commercial piping systems.

Rated 150 psi at 150 Degrees F

The Schedule 40 wall thickness and welded construction maintain structural integrity under sustained operating pressure up to 150 psi. The galvanized finish resists corrosion during extended exposure to moisture and harsh fluid environments.

Verify 2-inch MNPT threading and 10-inch length

Confirm the existing pipeline uses 2-inch male NPT threads and requires a 10-inch overall length with threaded both ends configuration. Ensure the 150 psi pressure rating and 150 Degrees F temperature limit match the system design parameters.

Highlights

  • Galvanized coating resists corrosion for long service life
  • Schedule 40 wall rated for 150 psi at 150 °F
  • 10-inch overall length suits standard piping runs
  • 2-inch MNPT threads connect directly to female fittings
  • Continuous-weld Grade A steel made in USA

Specifications

BrandBECK

Questions about this item

How hot can the galvanized steel nipple get while handling steam at 150 psi?

The nipple is rated for a maximum operating temperature of 150 degrees Fahrenheit at 150 psi, so it will reach that temperature when conveying steam at the pressure limit.

Which fittings must I already have to connect the 2-inch male NPT threads on this nipple?

You need female NPT fittings in the same 2-inch nominal size and Schedule 40 class to match the male threads on both ends of the nipple.

Will the 2 3/8-inch outside diameter of this Schedule 40 nipple match the 2-inch galvanized pipe I already have installed?

Yes, the 2 3/8-inch outside diameter is the standard OD for 2-inch nominal Schedule 40 pipe, so it will fit your existing galvanized piping.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.