We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel 2-inch MNPT close-thread pipe nipple Sch 40

Beck C. H.

Beck C. H. 2" MNPT Close TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-JTDY-3AZBM

A 2-inch Schedule 40 galvanized steel pipe nipple with male NPT threads on both ends, rated for 150 psi at 150°F and meeting ASTM A-53 Type F and A733 standards

  • 2" MNPT threaded ends enable direct pipe connection
  • Schedule 40 wall at 0.154 in handles 150 psi at 150 °F
  • Galvanized steel construction meets ASTM A-53 Type F and ASTM A733 Grade A
  • Continuous weld seam ensures leak-free performance under pressure
  • 062 in inside diameter maintains full flow capacity

2 Inch Galvanized Steel Pipe Nipple

This Schedule 40 nipple provides a close-threaded connection for plumbing systems requiring a 2 inch nominal bore. It suits installers joining two female NPT fittings in water, air or gas lines where galvanized steel is specified.

Threaded Both Ends 150 PSI Rating

Continuous-weld construction meets ASTM A-53 Type F and ASTM A733 Grade A standards for pressure service up to 150 psi at 150 degrees Fahrenheit. The galvanized coating resists corrosion in typical indoor and outdoor piping applications.

Close Length 2.375 Inch Outside Diameter

The close-threaded length leaves minimal exposed pipe between engaged fittings, useful in tight mechanical rooms or equipment hook-ups. Metal-detectable material aids pipeline location, while the 0.154 inch wall thickness matches standard Schedule 40 dimensions.

Highlights

  • 2" MNPT threaded ends enable direct pipe connection
  • Schedule 40 wall at 0.154 in handles 150 psi at 150 °F
  • Galvanized steel construction meets ASTM A-53 Type F and ASTM A733 Grade A
  • Continuous weld seam ensures leak-free performance under pressure
  • 062 in inside diameter maintains full flow capacity

Specifications

BrandBECK

Questions about this item

How do I install the 2" MNPT close nipple without stripping the threads?

Apply PTFE tape or pipe dope to the male NPT threads, hand-tighten into the female fitting, then finish with a pipe wrench one to two turns; the close length leaves no room for a pipe wrench on the body, so grip only the fitting.

Will the galvanized coating on this Schedule 40 nipple need replacement?

The zinc coating is permanent; if the pipe sees potable water, monitor for white rust or reduced flow and replace the nipple if corrosion appears, otherwise no scheduled maintenance is required.

At what pressure does this 2" galvanized nipple reach its rated limit?

The nipple is rated for 150 psi at 150 °F per ASTM A-53 Type F and ASTM A733 Grade A; sustained pressure above that level will exceed the design limit first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.