We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, threaded both ends, welded construction

Beck C. H.

Beck C. H. 2-1/2" MNPT x 3-1/2" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-BGKZ-YM2JT

Galvanized steel Schedule 40 pipe nipple with 2-1/2 inch male NPT threads for air, gas, oil, steam and water at 150 psi

  • MaterialHAWA
  • Galvanized coating resists corrosion for long service life
  • Male NPT threads connect directly to Schedule 40 fittings
  • Rated 150 psi at 150 °F for air gas oil steam water
  • Welded Grade A steel construction made in USA
  • 3-1/2 inch overall length fits tight plumbing runs

Application & Media Compatibility

This galvanized steel pipe nipple handles air, gas, oil, steam and water in Schedule 40 systems. The male NPT thread on one end and threaded both ends design fits standard plumbing and industrial piping networks. Made in USA construction meets Grade A material requirements for reliable fluid transfer.

Installers Needing Schedule 40 Threaded Fittings

Plumbers and maintenance technicians joining 2-1/2 inch nominal pipe with a 3-1/2 inch overall length will find this nipple suitable. Builders requiring different lengths, alternative end connections or higher pressure ratings beyond 150 psi at 150 degrees F should select other fittings.

Maximum Operating Pressure 150 psi @ 150 Degrees F

This pressure-temperature rating determines whether the nipple matches your system design. Continuous welded construction and galvanized coating support the stated limit for the listed media types. Exceeding this rating risks joint failure and leaks.

Highlights

  • Galvanized coating resists corrosion for long service life
  • Male NPT threads connect directly to Schedule 40 fittings
  • Rated 150 psi at 150 °F for air gas oil steam water
  • Welded Grade A steel construction made in USA
  • 3-1/2 inch overall length fits tight plumbing runs

Specifications

MaterialHAWA
BrandBECK

Questions about this item

What pressure can the Schedule 40 nipple handle continuously at 150 °F?

The galvanized steel nipple is rated for 150 psi at 150 °F, which is the maximum operating pressure for sustained service in air, gas, oil, steam or water lines.

How hot does the fitting get when steam runs through it all day?

The fitting itself reaches the fluid temperature; at the rated 150 °F steam the metal will be too hot to touch, so insulation or protective sleeving is normal practice.

Which thread sealant works with the 2-1/2" male NPT threads?

Standard PTFE tape or pipe dope approved for steel NPT joints will seal the 2-1/2" male threads on this nipple.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.