We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, threaded male ends, silver-grey finish

Beck C. H.

Beck C. H. 1-1/2" MNPT x 8-1/2" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-WAD6-SPBNX

Galvanized steel pipe nipple with 1-1/2 inch male NPT threads and 8-1/2 inch overall length for air, gas, oil, steam or water lines up to 150 psi

  • MaterialHAWA
  • Galvanized coating resists corrosion for air, gas, oil, steam and water service
  • Schedule 40 wall with continuous weld handles 150 psi at 150 °F
  • 1-1/2 in NPT male threads mate with standard fittings
  • 8-1/2 in overall length fits tight piping runs
  • Made in USA from Grade A steel for reliable strength

1-1/2" Schedule 40 Galvanized Nipple

This galvanized steel pipe nipple provides a threaded male connection for air, gas, oil, steam or water lines. It suits residential and light commercial plumbing where a Schedule 40 fitting is required. The continuous weld construction and Grade A steel meet standard pressure piping needs.

Sustained pressure and temperature rating

The fitting is rated for a maximum operating pressure of 150 psi at 150 degrees F, allowing continuous service under those conditions. Its welded seam maintains integrity during prolonged exposure to pressure cycles and thermal expansion. Galvanized coating resists corrosion throughout extended use in wet or humid environments.

Thermal and corrosion performance

The galvanized finish protects the steel from rust when carrying water or condensate at elevated temperatures. Steel construction transfers heat efficiently without softening at the rated operating temperature. The threaded male end seals reliably with compatible Schedule 40 female fittings under normal system vibration.

Highlights

  • Galvanized coating resists corrosion for air, gas, oil, steam and water service
  • Schedule 40 wall with continuous weld handles 150 psi at 150 °F
  • 1-1/2 in NPT male threads mate with standard fittings
  • 8-1/2 in overall length fits tight piping runs
  • Made in USA from Grade A steel for reliable strength

Specifications

MaterialHAWA
BrandBECK

Questions about this item

How hot does the 150 psi galvanized steel nipple get when carrying steam all day?

The nipple is rated for 150 psi at 150 degrees F, so its surface temperature will track the fluid temperature up to that limit.

Which Schedule 40 fittings must I already have to thread onto the 1-1/2 inch male NPT ends?

You need matching 1-1/2 inch female NPT couplings, elbows or tees rated for Schedule 40 pipe.

Will the 1 29/32 inch outside diameter thread into my existing 1-1/2 inch galvanized pipeline?

Yes, the 1 29/32 inch OD matches standard 1-1/2 inch Schedule 40 pipe, so it threads directly into compatible fittings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.