We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, threaded both ends, 6 inch length

Beck C. H.

Beck C. H. 1-1/2" MNPT x 6" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-08S7-HECBG

Threaded galvanized steel nipple, 6 inches long, rated for 150 psi at 150°F

  • Galvanized steel resists corrosion for long service life
  • Schedule 40 wall thickness handles 150 psi at 150 °F
  • Continuous weld construction ensures leak-free threaded joints
  • Meets ASTM A-53 Type F and ASTM A733 Grade A standards
  • Metal detectable material simplifies pipeline inspection

Product identity

The Beck C. H. galvanized steel pipe nipple is a Schedule 40 threaded fitting with a nominal size of 1-1/2 inches and an overall length of 6 inches. It is manufactured to ASTM A-53 Type F and ASTM A733 Grade A standards with continuous weld construction for plumbing and industrial piping systems.

Installation checks

Verify that the mating components use male NPT threads on both ends and that the system design pressure does not exceed 150 psi at 150 degrees Fahrenheit. Confirm the 1.9 inch outside diameter and 0.145 inch wall thickness match the required clearances and support spacing in your layout.

Sustained load behaviour

The galvanized coating and continuous weld seam are rated for continuous service at the stated pressure and temperature limit. Metal detectable material composition supports compliance tracking in regulated environments during extended operational cycles.

Highlights

  • Galvanized steel resists corrosion for long service life
  • Schedule 40 wall thickness handles 150 psi at 150 °F
  • Continuous weld construction ensures leak-free threaded joints
  • Meets ASTM A-53 Type F and ASTM A733 Grade A standards
  • Metal detectable material simplifies pipeline inspection

Specifications

BrandBECK

Questions about this item

What comes with the 1-1/2" MNPT x 6" galvanized steel nipple and do I need to buy sealant separately?

The package contains the Schedule 40 nipple with male NPT threads on both ends; pipe thread sealant or tape must be purchased separately for a leak-free joint.

Should I choose this 6-inch length or a different size for a 150 psi water line at 150 °F?

This 6-inch nipple is rated 150 psi at 150 °F; select a longer or shorter length only to match the exact centre-to-centre dimension your piping layout requires.

What does the 1.61-inch inside diameter mean when the nipple is installed in a real system?

The 1.61-inch bore sets the flow area; pressure drop will follow standard Schedule 40 friction-loss tables for that inside diameter at your design flow rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.