We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple with male threaded ends

Beck C. H.

Beck C. H. 1-1/2" MNPT x 6-1/2" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-JD40-SBYQV

Galvanized steel Schedule 40 pipe nipple with 1-1/2" male NPT threads, rated 150 psi for air, gas, oil, steam and water

  • MaterialHAWA
  • Galvanized coating resists corrosion for long service life
  • Schedule 40 rating handles 150 psi at 150 °F
  • 6-1/2 inch overall length suits standard piping runs
  • 1-1/2 inch MNPT threads connect directly to fittings
  • Welded steel construction provides structural strength

Galvanized Steel Pipe Nipple Schedule 40

This galvanized steel pipe nipple connects threaded fittings in air, gas, oil, steam and water lines. It is manufactured in the USA from Grade A steel with a continuous weld construction. The Schedule 40 wall provides standard weight for general plumbing and industrial piping systems.

150 psi at 150 Degrees F working pressure

The fitting handles up to 150 psi at 150 degrees Fahrenheit, giving headroom for typical residential and light commercial service pressures. It runs out when system pressure or temperature exceeds this rating, or when corrosive media require stainless steel or plastic alternatives instead of galvanized coating.

Replaces worn or damaged threaded nipples

This piece upgrades from a leaking, corroded or incorrectly sized nipple in an existing Schedule 40 network. The jump is worth it when the old fitting shows thread damage, scale buildup or seal failure, and a new galvanized nipple restores a tight joint without re-piping the whole run.

Highlights

  • Galvanized coating resists corrosion for long service life
  • Schedule 40 rating handles 150 psi at 150 °F
  • 6-1/2 inch overall length suits standard piping runs
  • 1-1/2 inch MNPT threads connect directly to fittings
  • Welded steel construction provides structural strength

Specifications

MaterialHAWA
BrandBECK

Questions about this item

Will the 1-1/2 in nominal size and 1 29/32 in outside diameter thread into my existing Schedule 40 galvanized fittings?

Yes, the nipple is made to Schedule 40 dimensions with 1-1/2 in nominal size and 1 29/32 in outside diameter, so it matches standard Schedule 40 galvanized fittings.

How can I verify the 150 psi @ 150 Degrees F rating is holding after I install the nipple?

Pressurize the system to its working pressure, then inspect every threaded joint for leaks; a tight, dry joint at operating temperature confirms the rating is being met.

Does the 6-1/2 in TBE nipple come with thread sealant or gaskets, or must I buy them separately?

The nipple is supplied as a single galvanized steel piece with male threads on both ends; thread sealant, tape or gaskets are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.