We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, 12 inch length, threaded both ends, silver-grey finish

Beck C. H.

Beck C. H. 1-1/2" MNPT x 12" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-N927-HSVSD

A 12-inch galvanised steel nipple with MNPT threads on both ends, Schedule 40 wall and 150 psi rating at 150 °F

  • MaterialHAWA
  • Galvanized coating resists corrosion for long service life
  • Schedule 40 wall handles 150 psi at 150 °F
  • Continuous weld construction ensures leak-free joints
  • 12-inch length fits standard plumbing layouts
  • ASTM A-53 Type F and A733 Grade A compliance

Galvanized Steel Pipe Nipple

This 12-inch Schedule 40 nipple is made from galvanized steel with continuous weld construction. It features male NPT threads on both ends for joining two female-threaded fittings in plumbing or industrial piping systems. The pipe meets ASTM A-53 Type F and ASTM A733 Grade A standards for reliable performance.

Installers needing a 1-1/2 inch nominal connection

The 1.9 inch outside diameter and 1.61 inch inside diameter suit standard 1-1/2 inch nominal pipe requirements. It is not suited for systems requiring higher pressure ratings than 150 psi at 150 degrees Fahrenheit. Builders needing different lengths, thread types, or materials should select an alternative fitting.

Rated for 150 psi working pressure

The 0.145 inch wall thickness provides the structural headroom for the stated pressure rating at elevated temperature. The 1.61 inch internal diameter allows adequate flow capacity for typical residential and light commercial water or air lines. Metal detectable construction aids in locating buried runs.

Highlights

  • Galvanized coating resists corrosion for long service life
  • Schedule 40 wall handles 150 psi at 150 °F
  • Continuous weld construction ensures leak-free joints
  • 12-inch length fits standard plumbing layouts
  • ASTM A-53 Type F and A733 Grade A compliance

Specifications

MaterialHAWA
BrandBECK

Questions about this item

What thread size must my existing fittings have to connect to the 1-1/2" MNPT ends?

Both ends use 1-1/2 inch MNPT threads, so mating fittings need matching 1-1/2 inch FNPT threads.

Will the 1.9 inch outside diameter and Schedule 40 wall thickness fit alongside my older galvanized pipe of the same nominal size?

Yes, the 1.9 inch OD and 0.145 inch wall match standard Schedule 40 dimensions for 1-1/2 inch nominal pipe.

How can I confirm the nipple is rated for the 150 psi @ 150 °F service I plan to use?

The body carries ASTM A-53 Type F and ASTM A733 markings that certify the 150 psi at 150 °F rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.