We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple with male threaded ends, silver-grey finish

Beck C. H.

Beck C. H. 1-1/2" MNPT x 10-1/2" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-RN0P-E887D

Galvanized steel Schedule 40 pipe nipple with 1-1/2 inch male NPT threads for air, gas, oil, steam or water at 150 psi

  • MaterialHAWA
  • Ready for air, gas, oil, steam and water service
  • Galvanized steel finish resists corrosion in harsh environments
  • Schedule 40 rating supports 150 psi at 150 °F
  • Continuous weld construction ensures leak-free performance
  • Made in USA with Grade A steel for reliable strength

Galvanized Steel Pipe Nipple

This galvanized steel pipe nipple is built for plumbing systems that carry air, gas, oil, steam or water. The Schedule 40 welded construction meets Grade A steel standards and is manufactured in the USA. It suits installers who need a reliable threaded connection for residential or light commercial piping.

1-1/2 Inch Male NPT Threads

The single specification that decides fit is the 1-1/2 inch male NPT thread on one end. This thread size must match the female fitting in your system exactly. The nipple has an overall length of 2-1/2 inches and an outside diameter of 1-29/32 inches.

Rated for 150 PSI at 150 Degrees F

The galvanized coating and continuous weld allow a maximum operating pressure of 150 psi at 150 degrees Fahrenheit. This rating covers typical water, air and steam lines in the intended applications. Buyers who need higher pressure or temperature limits should select a different fitting class.

Highlights

  • Ready for air, gas, oil, steam and water service
  • Galvanized steel finish resists corrosion in harsh environments
  • Schedule 40 rating supports 150 psi at 150 °F
  • Continuous weld construction ensures leak-free performance
  • Made in USA with Grade A steel for reliable strength

Specifications

MaterialHAWA
BrandBECK

Questions about this item

What does the 150 psi @ 150 °F rating mean when this nipple is installed in a real piping system?

It means the nipple is rated to handle up to 150 psi of internal pressure at temperatures up to 150 °F for air, gas, oil, steam or water service.

The 1-1/2" MNPT threaded end — what standard does it follow and what does that limit in practice?

The male NPT threads follow the standard taper pipe thread specification, limiting compatibility to matching 1-1/2" female NPT fittings.

With an outside diameter of 1 29/32 in and overall length of 2 1/2 in, what clearance do I need to fit and mount this nipple?

You need at least 1 29/32 in of radial clearance for the body and 2 1/2 in of axial space, plus extra length for thread engagement into the female fittings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.