We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel pipe nipple, black anodised finish, 4 inch NPT threads

Beck C. H.

Beck C. H. 0330053000 Pipe Nipple Steel 4 in NPT x NPT

SKU CH-RG0H-HX05J

A 4-inch steel pipe nipple with NPT threads on both ends, rated for 300 psi at 150°F and 150 psi steam at 360°F, featuring a black anodized finish and Grade B welded construction made in the USA

  • ColorTransparent
  • Rated for 300 psi air and gas service
  • Handles 150 psi steam at 360°F
  • Grade B steel construction for structural strength
  • Black anodized coating resists corrosion
  • 4-inch NPT threads connect directly to matching fittings

4-Inch Steel Pipe Nipple

This 4-inch steel pipe nipple connects two female NPT threads in air, gas, non-potable water and oil lines. It is manufactured in the USA from Grade B steel with a welded construction and a black anodized finish. The fitting handles up to 300 psi at 150 degrees F and 150 psi steam at 360 degrees F. The inside diameter measures 4 1/64 in.

Plumbers and industrial maintenance crews

This nipple suits installers who need a straight 4-inch NPT-to-NPT connector for the listed fluids and pressure range. It is not intended for potable water systems. Buyers who require a different nominal size, a different thread standard or a fitting rated for higher steam pressure should look at alternative products.

No bundled accessories or software

The product ships as a single steel nipple without additional components. There are no accessories, sealants or software included that would change the installation procedure or the range of compatible applications.

Highlights

  • Rated for 300 psi air and gas service
  • Handles 150 psi steam at 360°F
  • Grade B steel construction for structural strength
  • Black anodized coating resists corrosion
  • 4-inch NPT threads connect directly to matching fittings

Specifications

ColorTransparent
BrandBECK

Questions about this item

What thread size must the existing fitting have to connect this 4 in NPT pipe nipple?

The nipple uses 4 in NPT threads on both ends, so the mating fitting must also be 4 in NPT for a proper seal.

Will the black anodized coating on this steel nipple resist corrosion when joined to older galvanized pipe?

The black anodized finish provides corrosion resistance, and the Grade B steel construction is compatible with standard galvanized NPT threads in air, gas, oil or non-potable water systems.

How can I verify the nipple is holding pressure after installation?

Pressurise the line up to the 300 psi rating at 150 Degrees F and check all joints for leaks; the welded steel construction should show no weeping at the rated pressure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.