We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of grey knit gloves with black nitrile palm coating and TPR knuckle guards

BDG

BDG 99-1-9793-8 Cut-Resistant Impact Gloves A6 Nitrile

SKU CH-KJBB-YTJEX

Cut-resistant knit gloves rated ANSI A6 with TPR impact protection meeting ANSI 138 6.5 kN and EN 388 standards

  • ANSI/ISEA A6 cut resistance protects against sharp edges
  • TPR knuckle guards absorb impact forces up to 6.5 kN
  • Nitrile palm coating gives grip in wet and oily conditions
  • Certified to ANSI/ISEA 105-2016, 138-2019 and EN 388:2016
  • HPPE knit shell delivers abrasion level 4 durability

BDG Cut-Resistant Impact Gloves A6

These BDG gloves deliver ANSI/ISEA cut level A6 and abrasion level 4 protection for workers handling sharp or rough materials. The HPPE knit shell with nitrile palm coating suits automotive, metal-fabrication and general assembly tasks where both cut and impact hazards exist.

TPR Knuckle Guard and Nitrile Palm Coating

Thermoplastic rubber on the knuckles meets ANSI/ISEA 138-2019 impact standards with a tested force of 6.5 kN. The single-dip nitrile coating covers the palm only, preserving breathability on the back of the hand while improving grip in oily or wet conditions.

Slip-On Knit Cuff for Quick Donning

The elasticised knit wrist pulls on without straps, so gloves go on fast even with dirty hands. Users should verify that the palm-dip length covers the required grip area, as the coating does not extend over the fingertips or back of hand.

Highlights

  • ANSI/ISEA A6 cut resistance protects against sharp edges
  • TPR knuckle guards absorb impact forces up to 6.5 kN
  • Nitrile palm coating gives grip in wet and oily conditions
  • Certified to ANSI/ISEA 105-2016, 138-2019 and EN 388:2016
  • HPPE knit shell delivers abrasion level 4 durability

Specifications

BrandBDG

Questions about this item

How often will the HPPE knit material need replacing under heavy abrasion?

The ANSI/ISEA Abrasion Level 4 rating means the HPPE knit resists wear longer than lower-rated gloves, but exact replacement timing depends on your specific tasks and hours of use.

Does the 6.5 kN impact rating limit how long I can wear them during continuous hammering?

The ANSI/ISEA 138-2019 impact rating of 6.5 kN shows the TPR knuckle protection absorbs repeated blows, yet prolonged vibration exposure still requires regular rest breaks.

Will the nitrile palm coating get hot or slippery when worn all day in warm conditions?

The palm-dipped nitrile coating on HPPE knit breathes better than fully coated gloves, reducing heat build-up and maintaining grip during extended shifts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.