We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black ABS case 97 by 43 by 52 mm with T1 terminals

BatteryJack inc.

BatteryJack inc. PowerStar 12V 1.3Ah Battery For Advanced Technology Labs Um8 Ultrasound

SKU CH-HRDX-7ZB26

12V 1.3Ah AGM replacement battery fits Advanced Technology Labs UM8 ultrasound with sealed, maintenance-free design

  • Valve-regulated AGM design prevents spills and allows any-angle operation
  • 100 % OEM-compatible replacement fits Advanced Technology Labs Um8 ultrasound units
  • Sealed maintenance-free construction eliminates watering or electrolyte checks
  • Compact 97 × 43 × 52 mm footprint installs in space-constrained equipment bays
  • Expected service life of 4 to 7 years reduces replacement frequency

Replacement Battery for ATL UM8 Ultrasound

The BatteryJack PowerStar is a direct OEM replacement designed for the Advanced Technology Labs UM8 ultrasound system. It uses sealed AGM technology to provide reliable backup power in medical imaging environments. The unit arrives ready to install with no initial charging required.

1.3Ah Capacity with 4 to 7 Year Design Life

At 12 volts and 1.3 ampere-hours the battery supports typical UPS and emergency backup loads for the rated runtime. The AGM chemistry delivers maintenance-free operation and a low self-discharge rate for extended shelf life. Deep-discharge recovery capability helps protect the cells if the system is left unpowered for long periods.

Valve-Regulated Spill-Proof Construction

The sealed case uses a pressure-relief valve and ABS plastic housing to prevent electrolyte leakage in any orientation. This allows the battery to be mounted horizontally or vertically inside the ultrasound cart without spill risk. The T1 terminal style matches the original equipment connector for a secure fit.

Highlights

  • Valve-regulated AGM design prevents spills and allows any-angle operation
  • 100 % OEM-compatible replacement fits Advanced Technology Labs Um8 ultrasound units
  • Sealed maintenance-free construction eliminates watering or electrolyte checks
  • Compact 97 × 43 × 52 mm footprint installs in space-constrained equipment bays
  • Expected service life of 4 to 7 years reduces replacement frequency

Specifications

No published specifications for this item yet.

Questions about this item

Will the PowerStar AGM1213 fit the battery compartment of my ATL UM8 ultrasound without modification?

The battery measures 97 mm long, 43 mm wide and 52 mm high, with a total height of 58 mm including the T1 terminals, so compare those dimensions to the UM8 compartment before installing.

How can I verify the PowerStar AGM1213 is delivering its rated 1.3 Ah capacity after installation?

Run the UM8 on battery power until the low-voltage alarm triggers, then measure the discharge time against the 20-hour rate; a healthy pack should provide roughly 1.3 Ah under that load profile.

Does the PowerStar AGM1213 package include mounting brackets or cables for the UM8, or must I source them separately?

The unit ships as the sealed AGM cell with T1 terminals only; any brackets, wiring harnesses or adapters required by the UM8 are not included and must be obtained separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.